Your Position: Home > Low Voltage > Relay > H3RN-2 24VDC RELAY New

  Categories

Control System
Motion Control System
LCD Screen Panel
Instrumentation
Low Voltage
Transducer/Sensor
  

Service



Email: [email protected]
Tel: 0086-574-88333153

View History

   

H3RN-2 24VDC RELAY New

prevnext

H3RN-2 24VDC  RELAY  New
  • Market price: $ 46.2
  • Shop price: $ 14.0
  • Goods click count: 412
  • Total:
  • Quantity:
Add to cart collect
  

Description

H3RN-2 24VDC OMRON RELAY New

Product Description?

Ratings

Rated supply voltage

12 VDC

Operating voltage range

90% to 110% of rated supply voltage

Power consumption (Relay ON)

0.5 W (at 12 VDC)

Power consumption (Relay OFF)

0.2 W (at 12 VDC)

Reset voltage

10% max. of rated supply voltage

Number of time ranges

4

Time ranges

0.1 s to 1 s, 1 s to 10 s, 0.1 min to 1 min, 1 min to 10 min

Operating mode

ON delay, Flicker OFF start, Flicker ON start, Interval, Pulse Operation(use in interval mode, connect power supply terminals as pulse operation)

Control output Type

Relay output (DPDT)

Control output (Contact output)

Switching capacities (resistive load (cos(phi)=1)): 250 VAC 3 A
Minimum applicable load: 10 mA at 5 VDC (failure level: P)

Ambient temperature

Operating: -10 to 55 CEL
Storage: -25 to 65 CEL
(with no icing)

Ambient humidity

Operating: 35 to 85%

Characteristics

Accuracy of operating time

+/-1 % (FS) max. (+/-1% +/-10 ms max. in a ragen of 1 s)

Setting error

-15 to 15% (FS) -50 to 50 ms max.

Reset time

0.1 s max. (including halfway reset)

Influence of voltage

+/-2% FS max.

Influence of temperature

+/-2% FS max.

Insulation resistance

100 MOhm min. (at 500 VDC)

Dielectric strength

between contacts of different polarities: 2000 VAC, 50/60 Hz for 1 min
between operating power circuit and control output: 2000 VAC, 50/60 Hz for 1 min
between non-continuous contacts: 1000 VAC, 50/60 Hz for 1 min

Impulse withstand voltage

between power terminals: 1 kV

Noise immunity

+/-1.5 kV square-wave noise by noise simulator (pulse width: 100 ns/1 us, 1-ns rise)

Static immunity

Mulfunction: 4 kV Destruction: 8 kV

Vibration resistance (Destruction)

10 to 55 Hz, 0.75 mm single amplitude each in X, Y, and Z directions for 1 hours

Vibration resistance (Malfunction)

10 to 55 Hz, 0.5 mm single amplitude each in X, Y, and Z directions for 10min

Shock resistance (Destruction)

980 m/s2 3 times each 6 directions

Shock resistance (Malfunction)

100 m/s2 3 times each 6 directions

Mechanical Life expectancy (relay output)

10000000 operations min. (under no load at 1800 operations/h)

Electrical Life expectancy (relay output)

100000 operations min.(3 A at 250 VAC, resistive load at 1800 operations/h)

Degree of protection

IEC60529(JEM): IP40(excluding terminal section)

Applicable standard (UL)

Standard No.: UL508
File number: E41515

Applicable standard (CSA)

Standard No.: CSA C22.2 No.14
File number: LR22310

Applicable standard (EC Directive (Low Voltage Directive) )

EN61812-1
IEC60664-1 4 kV/2

Applicable standard (EC Directive (EMC Directive) )

EMI: EN61812-1
Emission Enclosure: EN55011 Group1 class A
Emission AC mains: EN55011 Group1 class A
EMS: EN61812-1
Immunity ESD: IEC61000-4-2(6 kV contact discharge, 8 kV air discharge)
cRF-interference: IEC61000-4-3(10 V/m, AM radio waves (80 MHz to 1 GHz))
Immunity Burst: IEC61000-4-4(2 kV power-line, 2 kV I/O signal-line)
Immunity Surge: IEC61000-4-5(1 kV line to line, 2 kV line to ground)

External connection method

Plug-in terminal

Case color

Munsell 5Y7/1(Light gray)

Weight

Approx. 18 g

 











  

User Comment

No comment
Username: Anonymous user
E-mail:
Rank:
Verification code: captcha
Content: