E6B2-CWZ1X 1000P/R 0.5M Encoder NEW

E6B2-CWZ1X 1000P?R 0.5M OMRON Encoder NEW

OMRON Encoder E6B2-CWZ1X 1000P?R        

Product Description:

Incremental model

External diameter of 40 mm.

Resolution of up to 2,000 ppr  

Specifications:

Model		E6B2-CWZ6C	E6B2-CWZ5B	E6B2-CWZ3E	E6B2-CWZ1X
Power supply		5 VDC -5% to 24 VDC	12 VDC -10% to 24 VDC	5 VDC -5% to 12 VDC	5 VDC ±5%, ripple (p-p):
voltage		+15%, ripple (p-p): 5% max.	+15%, ripple (p-p): 5% max.	+10%, ripple (p-p): 5% max.	5% max.
Current		80 mA max.	100 mA max.		160 mA max.
consumption *1
Resolution		10, 20, 30, 40, 50, 60,	100, 200, 360, 500, 600,	10, 20, 30, 40, 50, 60,	10, 20, 30, 40, 50, 60,
(pulses/rotation)		100, 200, 300, 360, 400,	1,000, 2,000	100, 200, 300, 360, 400,	100, 200, 300, 360, 400,
		500, 600, 720, 800,		500, 600, 1,000, 1,200,	500, 600, 1,000, 1,024,
		1,000, 1,024, 1,200,		1,500, 1,800, 2,000	1,200, 1,500, 1,800, 2,000
		1,500, 1,800, 2,000
Output phases		Phases A, B, and Z
Phase difference		90°±45° between A and B (1/4 T ± 1/8 T)
between outputs
Output		NPN open-collector	PNP open-collector	Voltage output	Line driver output *2
configuration		output	output	(NPN output)
Output capacity		Applied voltage:	Applied voltage:	Output resistance:	AM26LS31 equivalent
		30 VDC max.	30 VDC max.	2 kΩ	Output current
		Sink current:	Source current:	Sink current:	High level: IO = -20 mA
		35 mA max.	35 mA max.	20 mA max.	Low level: IS = 20 mA
		Residual voltage:	Residual voltage:	Residual voltage:	Output voltage:
		0.4 V max.	0.4 V max.	0.4 V max.	VO = 2.5 V min.
		(at sink current of	(at source current	(at sink current of	VS = 0.5 V max.
		35 mA)	of 35 mA)	20 mA)
Maximum		100 kHz	50 kHz	100 kHz
response
frequency *3
Rise and fall		1 μs max. (Control	1 μs max. (Cable length: 2 m max.,		0.1 μs max. (Cable
times of output		output voltage: 5 V,	Sink current: 10 mA)		length: 2 m max.,
		Load resistance: 1 kΩ,			IO = -20 mA, IS = 20 mA)
		Cable length: 2 m max.)
Starting torque		0.98 mNm max.
Moment of inertia		1×10-6 kgm2 max.; 3 × 10-7 kgm2 max. at 600 P/R max.
Shaft	Radial	30 N
loading	Thrust	20 N
Maximum		6,000 r/min
permissible speed
Protection circuits		Power supply reverse polarity protection, Load short-circuit protection			---
Ambient		Operating: -10 to 70°C (with no icing), Storage: -25 to 85°C (with no icing)
temperature range
Ambient humidity		Operating/Storage: 35% to 85% (with no condensation)
range
Insulation		20 MΩ min. (at 500 VDC) between current-carrying parts and case
resistance
Dielectric strength		500 VAC, 50/60 Hz for 1 min between current-carrying parts and case
Vibration		Destruction: 10 to 500 Hz, 150 m/s2 or 2-mm double amplitude for 11 min 3 times each in X, Y, and Z directions
resistance
Shock resistance		Destruction: 1,000m/s2 3 times each in X, Y, and Z directions
Degree of		IEC 60529 IP50
protection
Connection		Pre-wired Models (Standard cable length: 500 mm)
method
Materials		Case: ABS, Main unit: Aluminum, Shaft: SUS420J2
Weight		Approx. 100 g
(packed state)
Accessories		Coupling, Hexagonal wrench, Instruction manual

 

*1.An inrush current of approximately 9 A will flow for approximately 0.3 ms when the power is turned ON.

*2.The line driver output is a data transmission circuit compatible with RS-422A and long-distance transmission is possible with a twisted-pair cable. The quality is equivalent to AM26LS31.