PLC CPU AC220V 8 DI 6 DO relay KINCO K304EX-14AR New with programming cable

Kinco K3 PLC CPU Module CPU304EX Series K304EX-14AR NIB 8 Digital Inputs 6 Relay Outputs AC85~265V New 

If you need more than 10pcs and want to get better wholesale price, please feel free to contact us by following:
email:[email protected]
Tel:0086-574- 88333153
We will quote you our best price to you in 24hours.

Specifications:

Model	CPU304EX
	K304EX-14AR
Technical Specification
CPU	16-bit industrial
Execution Speed	Typical Bool instruction time: <0.5 μS
	Word operation time: <48μS
	Arithmetic operation time for integers: <65μS
	Arithmetic operation time for floating points: <150μS
DI Points	8XDC24V
DO Points	6Xrelay
User Program Memory	FRAM, 8KB/about 1,200 steps
Program Backup	Permanent storage, without the need of battery
Memory Area	Variable storage area (V area): 4KB
	System storage area (SM area): 300 bytes
	Internal storage area (M area): 32 bytes
Data Retention Characteristic	Configure with the programming software: V area, C (counter) area
Retention Mode and Period	Adopt super capacitors and support a retention period of not less than 144 hours upon power failure under normal temperature.
Data Backup Characteristic	Perform backup operations VB3648~VB3902 according to user instructions, 255 bytes in total
Backup Mode and Time	FRAM, 255 bytes in total (writing operation for 10 billion times), permanent backup
Floating Points	Supported; the whole V area can be used for floating points
Programming Language Supported	Ladder Drawing (LD), Instruction List (IL)
Instruction Set	Basic instructions: 55; expansion instructions: 252
Password Protection	Yes
Max. I/O	Digital data: 78 in total (64 DI and 64 DO respectively);
	Analog data: 16 in total (16 AI and 16 AO respectively)
Counter	128
Operation Mode of Counter	Addition, subtraction
Counter Range	-32768~32767
Counting Value Retention Function	Yes
Timer	128
	1 ms time base: 4
	10 ms time base: 16
	100 ms time base: 108
High-speed Counter	6 high-speed counters
	where, single-phase counters: 6, with a maximum frequency of 30 KHz
	where, dual-phase counters: 4, with a maximum frequency of 20 KHz
Analog Potentiometer	2, 10-bit resolution, values corresponding to internal registers
Interruption Function	Timing interruption: 2, 1ms resolution;
	Timer interruption: T2/T3, 1ms resolution;
	Edge interruption: 4, rising edge or falling edge optional;
	High-speed interruption, communication interruption
Real-time Clock	Yes, with an error not greater than 2 minutes/month under a temperature of 25°C
	The user can use the software to set/read: year, month, day, hour, minute, second, week. Standby batteries are used to supply power for the real-time clock upon power failure. Under normal temperature, the accumulative retention period of the real-time clock upon power failure is up to 50,000 hours.
Number of Connectable Expansion Modules	4; regardless of types
COM Port	1, RS232 or RS485;
	Supported working modes: Programming, Modbus-RTU (slave), Free protocol
Equipment Connected with COM Port	RS232/RS485: PC (for programming), third-party HMI panel, third-party serial communication equipment (for example, instruments, bar code reader, etc.)
Input Power Supply	AC85~265V
Sensor Load Power Supply	DC24V, max. 500 mA
Dimensions (L*W*H)	125X114X70