No comment |
>
Motion Control System >
AC Servo System >
Delta >
ECMA-F11855R3+ASD-A2-5523-L Delta 220V 5.5KW 35.01NM 1500r/min 180mm Keyway AC Servo Motor Drive kits with 3M cableECMA-F11855R3+ASD-A2-5523-L Delta 220V 5.5KW 35.01NM 1500r/min 180mm Keyway AC Servo Motor Drive kits with 3M cable
Motor+Drive: ECMA-F11855R3+ASD-A2-5523-L
Package Content:
1* 5.5KW AC servo Motor
1* 5.5KW AC Servo Drive
1* 3M Encoder Cable &Power Cable
1 Motor Specifications
Model | ECMA-F11855R3 |
Product Name | Electronic Commutation Motor |
Servo Type | AC Servo |
Name of the Series | A2 |
Rated Voltage | 220V |
Encoder Type | incremental type, 20-bit |
Motor Frame Size | 180mm |
Type of Shaft Diameter and Oil Seal | Keyway(with fixed screw holes) ,w/o Brake with Oil Seal |
Standard Shaft Diameter | 3=42mm |
Rated Power Output | 5500W |
Rated torque (N-m)*1 | 35.01 |
Max. torque (N-m) | 87.53 |
Rated Speed | 1500 rpm |
Max. speed | 3000 rpm |
Rated current (A) | 40 A |
Max. instantaneous current (A) | 100A |
Power rating (kW/s) | 122.9 |
Rotor inertia (× 10-4kg.m2) | 99.78 |
Mechanical constant (ms) | 0.96 |
Torque constant-KT (N-m/A) | 0.88 |
Voltage constant-KE (mV/(r/min)) | 31.0 |
Armature resistance (Ohm) | 0.025 |
Armature inductance (mH) | 0.60 |
Electric constant (ms) | 24.0 |
Insulation class | Class A (UL), Class B (CE) |
Insulation resistance | > 100 M ohm , DC 500 V |
Insulation strength | 1.8k Vac, 1 sec |
Weight (kg) (without brake) | 30.5 Kg |
Radial max. loading (N) | 1764 |
Axial max. loading (N) | 588 |
Power rating (kW/s) (with brake) | 119.4 |
Rotor inertia (× 10-4kg.m2) (with brake) | 102.70 |
Mechanical constant (ms) (with brake) | 0.99 |
Vibration grade (μm) | 15 |
Operating temperature | 0~40 degree centigrade |
Storage temperature | -10~80 degree centigrade |
Operating humidity | 20% to 90% RH (non-condensing) |
Storage humidity | 20% to 90% RH (non-condensing) |
Vibration capacity | 2.5G |
IP Rating | IP65 |
Approvals | CE UL |
2 Drive Specifications
Model | ASD-A2-5523-L | |||
Product Name | AC SERVO Drive | |||
Series | A2 | |||
Model Type | Full-Closed Control | |||
Power | Phase / Voltage | Three-phase 220 VAC | ||
Permissible Voltage | Three-phase 200 ~ 230 VAC, -15% ~ 10% | |||
Continuous Output Current | 40 Arms | |||
Cooling method | Fan Cooling | |||
Encoder Resolution (Servo Drive Resolution) | Incremental type: 20-bit (1280000 p/rev) ; Absolute type: 17-bit (1280000 p/rev) | |||
Main Circuit Control | SVPWM (Space Vector Pulse Width Modulation) Control | |||
Control Mode | Auto / Manual | |||
Dynamic Brake | External | |||
Position Control Mode | Max. Input Pulse Frequency | Max. 500Kpps / 4Mpps (Line driver), Max. 200Kpps (Open collector) | ||
Pulse Type | Pulse + Direction, A phase + B phase, CCW pulse + CW pulse | |||
Command Source | External pulse / Register | |||
Smoothing Strategy | Low-pass and P-curve filter | |||
E-gear ratio | E-gear ratio N/M multiple N: 1~32767, M: 1:32767 (1/50 < N/M < 25600) | |||
Torque Limit | Parameter settings | |||
Feed Forward Compensation | Parameters settings | |||
Speed Control Mode | Analog Command Input | Voltage Range | 0 ~ ±10 VDC | |
Input Resistance | 10 KΩ | |||
Time Constant | 2.2 us | |||
Speed Control Range*1 | 1 : 3000 | |||
Command Source | External analog command / Register | |||
Smoothing Strategy | Low-pass and S-curve filter | |||
Torque Limit | Via parameter setting or analog input | |||
Bandwidth | Maximum 1 kHz | |||
Speed Accuracy*2 | 0.01% or less at 0 to 100% load fluctuation | |||
0.01% or less at ±10% power fluctuation | ||||
0.01% or less at 0 to 50 degree centigrade ambient temperature fluctuation | ||||
Torque Control Mode | Analog Command Input | Voltage Range | 0 ~ ±10 VDC | |
Input Resistance | 10 KΩ | |||
Time Constant | 2.2 us | |||
Command Source | External analog command / Register | |||
Smoothing Strategy | Low-pass filter | |||
Speed Limit | Via parameter setting or analog input | |||
Analog Monitor Output | Monitor signal can set byparameters (Output voltage range: ±8 V) | |||
Communication Interface | RS-232 / RS-485 / USB | |||
ECMA-F11855R3+ASD-A2-5523-L Delta 220V 5.5KW 35.01NM 1500r/min 180mm Keyway AC Servo Motor Drive kits with 3M cable
Motor+Drive: ECMA-F11855R3+ASD-A2-5523-L
Package Content:
1* 5.5KW AC servo Motor
1* 5.5KW AC Servo Drive
1* 3M Encoder Cable &Power Cable1 Motor Specifications
Model
ECMA-F11855R3
Product Name
Electronic Commutation Motor
Servo Type
AC Servo
Name of the Series
A2
Rated Voltage
220V
Encoder Type
incremental type, 20-bit
Motor Frame Size
180mm
Type of Shaft Diameter and Oil Seal
Keyway(with fixed screw holes) ,w/o Brake with Oil Seal
Standard Shaft Diameter
3=42mm
Rated Power Output
5500W
Rated torque (N-m)*1
35.01
Max. torque (N-m)
87.53
Rated Speed
1500 rpm
Max. speed
3000 rpm
Rated current (A)
40 A
Max. instantaneous current (A)
100A
Power rating (kW/s)
122.9
Rotor inertia (× 10-4kg.m2)
99.78
Mechanical constant (ms)
0.96
Torque constant-KT (N-m/A)
0.88
Voltage constant-KE (mV/(r/min))
31.0
Armature resistance (Ohm)
0.025
Armature inductance (mH)
0.60
Electric constant (ms)
24.0
Insulation class
Class A (UL), Class B (CE)
Insulation resistance
> 100 M ohm , DC 500 V
Insulation strength
1.8k Vac, 1 sec
Weight (kg) (without brake)
30.5 Kg
Radial max. loading (N)
1764
Axial max. loading (N)
588
Power rating (kW/s) (with brake)
119.4
Rotor inertia (× 10-4kg.m2) (with brake)
102.70
Mechanical constant (ms) (with brake)
0.99
Vibration grade (μm)
15
Operating temperature
0~40 degree centigrade
Storage temperature
-10~80 degree centigrade
Operating humidity
20% to 90% RH (non-condensing)
Storage humidity
20% to 90% RH (non-condensing)
Vibration capacity
2.5G
IP Rating
IP65
Approvals
CE UL
2 Drive Specifications
Model
ASD-A2-5523-L
Product Name
AC SERVO Drive
Series
A2
Model Type
Full-Closed Control
Power
Phase / Voltage
Three-phase 220 VAC
Permissible Voltage
Three-phase 200 ~ 230 VAC, -15% ~ 10%
Continuous Output Current
40 Arms
Cooling method
Fan Cooling
Encoder Resolution (Servo Drive Resolution)
Incremental type: 20-bit (1280000 p/rev) ; Absolute type: 17-bit (1280000 p/rev)
Main Circuit Control
SVPWM (Space Vector Pulse Width Modulation) Control
Control Mode
Auto / Manual
Dynamic Brake
External
Position
Control
Mode
Max. Input Pulse
Frequency
Max. 500Kpps / 4Mpps (Line driver), Max. 200Kpps (Open collector)
Pulse Type
Pulse + Direction, A phase + B phase, CCW pulse + CW pulse
Command Source
External pulse / Register
Smoothing Strategy
Low-pass and P-curve filter
E-gear ratio
E-gear ratio N/M multiple N: 1~32767, M: 1:32767 (1/50 < N/M < 25600)
Torque Limit
Parameter settings
Feed Forward Compensation
Parameters settings
Speed
Control
Mode
Analog
Command
Input
Voltage
Range
0 ~ ±10 VDC
Input
Resistance
10 KΩ
Time
Constant
2.2 us
Speed Control Range*1
1 : 3000
Command Source
External analog command / Register
Smoothing Strategy
Low-pass and S-curve filter
Torque Limit
Via parameter setting or analog input
Bandwidth
Maximum 1 kHz
Speed Accuracy*2
0.01% or less at 0 to 100% load fluctuation
0.01% or less at ±10% power fluctuation
0.01% or less at 0 to 50 degree centigrade ambient temperature fluctuation
Torque
Control
Mode
Analog
Command
Input
Voltage
Range
0 ~ ±10 VDC
Input
Resistance
10 KΩ
Time
Constant
2.2 us
Command Source
External analog command / Register
Smoothing Strategy
Low-pass filter
Speed Limit
Via parameter setting or analog input
Analog Monitor Output
Monitor signal can set byparameters (Output voltage range: ±8 V)
Communication Interface
RS-232 / RS-485 / USB
No comment |