ECMA-F11845RS+ASD-A2-4523-M Delta 220V 4.5KW 28.65NM 1500r/min 180mm Keyway AC Servo Motor Drive kits with 3M cable

ECMA-F11845RS+ASD-A2-4523-M Delta 220V 4.5KW 28.65NM 1500r/min 180mm Keyway AC Servo Motor Drive kits with 3M cable

Motor + Drive: ECMA-F11845RS+ASD-A2-4523-M

Package Content:
1* 4.5KW AC servo Motor
1* 4.5KW  AC Servo  Drive
1* 3M Encoder Cable &Power Cable 

1 Motor Specifications

Model	ECMA-F11845RS
Product Name	Electronic Commutation Motor
Servo Type	AC Servo
Name of the Series	A2
Rated Voltage	220V
Encoder Type	incremental type, 20-bit
Motor Frame Size	180mm
Type of Shaft Diameter and Oil Seal	Keyway(with fixed screw holes) ,w/o Brake with Oil Seal
Standard Shaft Diameter	S=35mm
Rated Power Output	4500W
Rated torque (N-m)*1	28.65
Max. torque (N-m)	71.62
Rated Speed	1500 rpm
Max. speed	3000 rpm
Rated current (A)	32.5 A
Max. instantaneous current (A)	81.3 A
Power rating (kW/s)	105.5
Rotor inertia  (× 10-4kg.m2)	77.75
Mechanical constant (ms)	0.92
Torque constant-KT (N-m/A)	0.88
Voltage constant-KE (mV/(r/min))	32
Armature resistance (Ohm)	0.032
Armature inductance (mH)	0.89
Electric constant (ms)	27.8
Insulation class	Class A (UL), Class B (CE)
Insulation resistance	> 100 M ohm , DC 500 V
Insulation strength	1.8k Vac, 1 sec
Weight (kg)  (without brake)	23.5 Kg
Radial max. loading (N)	1470
Axial max. loading (N)	490
Power rating (kW/s) (with brake)	101.8
Rotor inertia  (× 10-4kg.m2) (with brake)	80.65
Mechanical constant (ms) (with brake)	0.96
Vibration grade (μm)	15
Operating temperature	0~40  degree centigrade
Storage temperature	-10~80  degree centigrade
Operating humidity	20% to 90% RH (non-condensing)
Storage humidity	20% to 90% RH (non-condensing)
Vibration capacity	2.5G
IP Rating	IP65
Approvals	CE  UL

2  Drive Specifications

Model				ASD-A2-4523-M
Product Name				AC SERVO Drive
Series				A2
Model Type				Full-Closed CANopen E-CAM
Power	Phase / Voltage			Three-phase 220 VAC
	Permissible Voltage			Three-phase 200 ~ 230 VAC, -15% ~ 10%
	Continuous Output Current			32.5 Arms
Cooling method				Fan Cooling
Encoder Resolution  (Servo Drive Resolution)				Incremental type: 20-bit (1280000 p/rev) ; Absolute type: 17-bit (1280000 p/rev)
Main Circuit Control				SVPWM (Space Vector Pulse Width Modulation) Control
Control Mode				Auto / Manual
Dynamic Brake				Built-in
Position Control Mode		Max. Input Pulse Frequency		Max. 500Kpps / 4Mpps (Line driver), Max. 200Kpps (Open collector)
		Pulse Type		Pulse + Direction, A phase + B phase, CCW pulse + CW pulse
		Command Source		External pulse / Register
		Smoothing Strategy		Low-pass and P-curve filter
		E-gear ratio		E-gear ratio N/M multiple N: 1~32767, M: 1:32767 (1/50 < N/M < 25600)
		Torque Limit		Parameter settings
		Feed Forward Compensation		Parameters settings
Speed Control Mode		Analog Command Input	Voltage Range	0 ~ ±10 VDC
			Input Resistance	10 KΩ
			Time Constant	2.2 us
		Speed Control Range*1		1 : 5000
		Command Source		External analog command / Register
		Smoothing Strategy		Low-pass and S-curve filter
		Torque Limit		Via parameter setting or analog input
		Bandwidth		Maximum 1 kHz
		Speed Accuracy*2		0.01% or less at 0 to 100% load fluctuation
				0.01% or less at ±10% power fluctuation
				0.01% or less at 0 to 50 degree centigrade ambient temperature fluctuation
Torque Control Mode		Analog Command Input	Voltage Range	0 ~ ±10 VDC
			Input Resistance	10 KΩ
			Time Constant	2.2 us
		Command Source		External analog command / Register
		Smoothing Strategy		Low-pass filter
		Speed Limit		Via parameter setting or analog input
Analog Monitor Output				Monitor signal can set by parameters (Output voltage range: ±8 V)
Communication Interface				RS-232 / RS-485 / USB