TL-N20MY1 Proximity Switch NEW

TL-N20MY1 OMRON Proximity Switch NEW

OMRON Proximity Switch TL-N20MY1               

Product Description:

Easy installation, high-speed pulse generator, high-speed rotation control, and more.

Direct mounted to metal (-N Models).

A wealth of models ideal for limit control, counting control, and other applications (-N Models).

Specifications:

Model		TL-N5ME[], TL-N5MY[]	TL-N10ME[], TL-N10MY[]	TL-N20ME[], TL-N20MY[]
Sensing distance		5 mm ±10%	10 mm ±10%	20 mm ±10%
Set distance		0 to 4 mm	0 to 8 mm	0 to 16 mm
Differential travel		15% max. of sensing distance
Detectable object		Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on Data Sheet.)
Standard sensing object		Iron, 30 × 30 × 1 mm	Iron, 40 × 40 × 1 mm	Iron, 50 × 50 × 1 mm
Response frequency *1		E Models: 500 Hz		E Models: 40 Hz
		Y Models: 10 Hz		Y Models: 10 Hz
Power supply voltage *2		E Models: 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
(operating voltage range)		Y Models: 100 to 220 VAC (90 to 250 VAC), 50/60 Hz
Current consumption		E Models: 8 mA max. at 12 VDC, 15 mA max. at 24 VDC
Leakage current		Y Models: Refer to Engineering Data on Data Sheet.
Control	Load current	E Models: 100 mA max. at 12 VDC, 200 mA max. at 24 VDC
output		Y Models: 10 to 200 mA
	Residual	E Models: 1 V max. (load current: 200 mA)
	voltage	Y Models: Refer to Engineering Data on Data Sheet.
Indicators		E Models: Detection indicator (red)
		Y Models: Operation indicator (red)
Operation mode (with		E1/Y1 Models: NO
sensing object approaching)		E2/Y2 Models: NC
		Refer to the timing charts under I/O Circuit Diagrams onData Sheet for details.
Protection circuits		E Models: Reverse polarity protection, Surge suppressor
		Y Models: Surge suppressor
Ambient temperature range		Operating/Storage: -25 to 70°C (with no icing or condensation)
Ambient humidity range		Operating/Storage: 35% to 95% (with no condensation)
Temperature influence		±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence		E Models: ±2.5% max. of sensing distance at rated voltage in rated voltage ±10% range
		Y Models: ±1% max. of sensing distance at rated voltage in rated voltage ±10% range
Insulation resistance		50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		E Models: 1,000 VAC, 50/60 Hz for 1 min between current-carrying parts and case
		Y Models: 2,000 VAC, 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance		Destruction: 500 m/s2 10 times each in X, Y, and Z directions
Degree of protection		IEC 60529 IP67, in-house standards: oil-resistant
Connection method		Pre-wired Models (Standard cable length: 2 m)
Weight (packed state)		Approx. 145 g	Approx. 170 g	Approx. 240 g
Materials	Case	Heat-resistant ABS
	Sensing
	surface
Accessories		E Models:	E Models:	E Models:
		Mounting Bracket,	Mounting Bracket,	Mounting Bracket,
		Mounting phillips screws (M4 × 25),	Mounting phillips screws (M4 × 30),	Mounting phillips screws (M5 × 40),
		Instruction manual	Instruction manual	Instruction manual
		Y Models:	Y Models:	Y Models:
		Instruction manual	Instruction manual	Instruction manual

 

*1.The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.

*2.E Models (DC switching models): A full-wave rectification power supply of 24 VDC ±10% (average value) can be used.