E2KQ-X10ME1 Chemical-resistant Proximity Sensor NEW

E2KQ-X10ME1 Omron Chemical-resistant Proximity Sensor NEW

Product Description:

DC 3-Wire Model , Unshielded , M18 , Sensing Distance 6-10mm , Operation Mode NO

Specifications:

Cylinder type sensing head size	M18
Type	Unshielded
Sensing method	Capacitive type
Sensing distance	10 mm
Setting distance	6 to 10 mm
Differential distance	4% to 20% of sensing distance
Sensing object	Conductor and dielectrics
Standard sensing object	With grounded metal 50*50*1mm
Response frequency	DC: 35 Hz (average)
Power supply voltage	12 to 24 VDC (ripple(p-p) :10% Max.)
Operating voltage range	10 to 30 VDC
Current consumption	15 mA Max.
Control output (Output type)	NPN voltage-current output
Control output (Switching capacity)	0 to 100 mA
Control output (Residual voltage)	(DC) 1.5 V Max. ?under load current with cable length of 2m?
Indicator	Detection indicator(red)
Operation mode	NO
Sensitivity setting	12-turn adjustment
Protective circuit	Surge suppressor
	Power supply reverse polarity protection
Standard or Different frequency	Standard
Ambient temperature	Operating: -10 to 55 CEL
	Storage: -25 to 55 CEL
	(with no icing or condensation)
Ambient humidity	Operating: 35 to 85 %RH
	Storage: 35 to 85 %RH
	(with no condensation)
Temperature influence	+-15% Max. of sensing distance in temperature range of -10 to +55CEL
	(As the basis for sensing distance of 23CEL)
Voltage influence	+-2% Max. of sensing distance in rated voltage range +-20%. (As the basis for sensing distance at standard power voltage)
Insulation resistance	50 M OHM Min. at 500VDC between charged parts and the case
Dielectric strength	500 VAC 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance	10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	500m/s2 for 3 times each in X, Y, and Z directions
Degree of protection	IEC60529: IP66
	Company standard: Oil-proof
Applicable standard (EC Directive (Low Voltage Directive))	EN60947-1
	EN60947-5-2
Applicable standard (EC Directive (EMC Directive))	EMI: EN60947-5-2
	Emission Enclosure: CISPR11 Group 1 class A
	EMS: EN60947-5-2
	Immunity ESD: IEC61000-4-2
	Immunity RF-interference: IEC61000-4-3
	Immunity Conducted Disturbance: IEC61000-4-6
	Immunity Burst: IEC61000-4-4
	CE marking: Equipped
Applicable standard (CCC mark)	Not equipped
Connection method	Pre-wired models (Cable length: 2 m)
Weight (Packed state)	approx. 150 g
Material (case)	Fluoride resin
Material (sensing surface)	Fluoride resin
Material (clamping nuts)	Fluoride resin
Accessories	Instruction manual, Adjustment driver