| No comment |
Your Position: Home
> Transducer/Sensor > Photoelectric Sensors > Photoelectric Switch > E2F-X5E1 E2F-X5E1 Resin-case Proximity Sensor NEWE2F-X5E1 E2F-X5E1 Resin-case Proximity Sensor NEW
Description
E2F-X5E1 E2F-X5E1 Resin-case Proximity Sensor NEW
Product Description:
DC 3-Wire Model , Shielded , M18 , Sensing Distance 5mm , Operation Mode NO.
Specifications:
Cylinder type sensing head size | M18 |
Type | Shielded |
Sensing method | Inductive type |
Sensing distance | 5 mm -10% to +10% |
Setting distance | 0 to 4 mm |
Differential distance | 10% Max. of sensing distance |
Sensing object | Ferrous metal (Sensitivity lowers with non-ferrous metals.) |
Standard sensing object | Iron 18*18*1mm |
Response frequency | DC: 600 Hz (average) |
Power supply voltage | 12 to 24 VDC (ripple(p-p) :10% Max.) |
Operating voltage range | 10 to 30 VDC |
Current consumption | 17 mA Max. |
Control output (Output type) | NPN voltage-current output |
Control output (Switching capacity) | 0 to 200 mA |
Control output (Residual voltage) | (DC) 2 V Max. ?under load current with cable length of 2m? |
Indicator | Detection indicator(red) |
Operation mode | NO |
Protective circuit | Surge suppressor |
Output short-cut protection | |
Power supply reverse polarity protection | |
Standard or Different frequency | Standard |
Ambient temperature | Operating: -25 to 70 CEL |
Storage: -25 to 70 CEL | |
(with no icing or condensation) | |
Ambient humidity | Operating: 35 to 95 %RH |
Storage: 35 to 95 %RH | |
(with no condensation) | |
Temperature influence | +-10% Max. of sensing distance in temperature range of -25 to +70CEL |
(As the basis for sensing distance of 23CEL) | |
Voltage influence | +-2.5% Max. of sensing distance in rated voltage range +-15%. (As the basis for sensing distance at standard power voltage) |
Insulation resistance | 50 M OHM Min. at 500VDC between charged parts and the case |
Dielectric strength | 1000 VAC 50/60 Hz for 1 minute between charged parts and the case |
Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
Shock resistance | 1000m/s2 for 10 times each in X, Y, and Z directions |
Degree of protection | IEC60529: IP68 |
Company standard: Oil-proof | |
Applicable standard (EC Directive (EMC Directive)) | CE marking: Equipped |
Applicable standard (CCC mark) | Not equipped |
Connection method | Pre-wired models (Cable length: 2 m) |
Weight (Packed state) | approx. 130 g |
Material (case) | Polyarylate |
Material (sensing surface) | Polyarylate |
Material (clamping nuts) | Polyacetal |
Accessories | Instruction manual |
E2F-X5E1 E2F-X5E1 Resin-case Proximity Sensor NEWProduct Description:
DC 3-Wire Model , Shielded , M18 , Sensing Distance 5mm , Operation Mode NO.
Specifications:
Cylinder type sensing head size
M18
Type
Shielded
Sensing method
Inductive type
Sensing distance
5 mm -10% to +10%
Setting distance
0 to 4 mm
Differential distance
10% Max. of sensing distance
Sensing object
Ferrous metal (Sensitivity lowers with non-ferrous metals.)
Standard sensing object
Iron 18*18*1mm
Response frequency
DC: 600 Hz (average)
Power supply voltage
12 to 24 VDC (ripple(p-p) :10% Max.)
Operating voltage range
10 to 30 VDC
Current consumption
17 mA Max.
Control output (Output type)
NPN voltage-current output
Control output (Switching capacity)
0 to 200 mA
Control output (Residual voltage)
(DC) 2 V Max. ?under load current with cable length of 2m?
Indicator
Detection indicator(red)
Operation mode
NO
Protective circuit
Surge suppressor
Output short-cut protection
Power supply reverse polarity protection
Standard or Different frequency
Standard
Ambient temperature
Operating: -25 to 70 CEL
Storage: -25 to 70 CEL
(with no icing or condensation)
Ambient humidity
Operating: 35 to 95 %RH
Storage: 35 to 95 %RH
(with no condensation)
Temperature influence
+-10% Max. of sensing distance in temperature range of -25 to +70CEL
(As the basis for sensing distance of 23CEL)
Voltage influence
+-2.5% Max. of sensing distance in rated voltage range +-15%. (As the basis for sensing distance at standard power voltage)
Insulation resistance
50 M OHM Min. at 500VDC between charged parts and the case
Dielectric strength
1000 VAC 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
1000m/s2 for 10 times each in X, Y, and Z directions
Degree of protection
IEC60529: IP68
Company standard: Oil-proof
Applicable standard (EC Directive (EMC Directive))
CE marking: Equipped
Applicable standard (CCC mark)
Not equipped
Connection method
Pre-wired models (Cable length: 2 m)
Weight (Packed state)
approx. 130 g
Material (case)
Polyarylate
Material (sensing surface)
Polyarylate
Material (clamping nuts)
Polyacetal
Accessories
Instruction manual
