6ES7133-0BL00-0XB0 SIEMENS ELECTRONIC MODULE FOR ET 200B New

6ES7133-0BL00-0XB0 SIEMENS ELECTRONIC MODULE FOR ET 200B New

SIEMENS ELECTRONIC MODULE FOR ET 200B 6ES7133-0BL00-0XB0

Product Description:

SIMATIC DP, ELECTRONIC MODULE DIGITAL, FOR ET 200B, W=160MM, 16DI 24V DC; 16DO 24V DC, 0.5A MAX. 12 MBIT/S; STANDARD.

Features:

Supply voltage
24 V DC	Yes; L1+, L2+, L5+; value at t < 0.5 s: 35 V
permissible range, lower limit (DC)	18.5 V
permissible range, upper limit (DC)	30.2 V
Input current
Current consumption, typ.	85 mA; From L5+; logic
Current consumption, max.	1000 mA; from L5+; sensor
I²t	0.05 A²·s; with starting current inrush
Power losses
Power loss, max.	5.5 W
Hardware configuration
Rack
Required terminal block	TB2/DC, TB2-4/DC, TB4/DC, TB4-4/DC
Digital inputs
Number/binary inputs	16
Input voltage
Rated value, DC	24 V
for signal "0"	-30 to +5 V
for signal "1"	13 to 30 V
Input current
for signal "1", typ.	4 mA; At 24 V min. 2 mA
Input delay (for rated value of input voltage)
for standard inputs
at "0" to "1", max.	3 ms
Cable length
Cable length unshielded, max.	100 m
Digital outputs
Number/binary outputs	16
Functionality/short-circuit strength	Yes; Electronic
Limitation of inductive shutdown voltage to	typ. (L1+, L2+) -55 V
Lamp load, max.	5 W
Controlling a digital input	Yes
Output voltage
Rated value (DC)	24 V
for signal "0", max.	2 V; Idling
for signal "1", min.	UE -3 V
Output current
for signal "1" permissible range for 0 to 60 °C, min.	0.5 A; in groups of 8, each group 8x 0.5 A
for signal "0" residual current, max.	1 mA
Output delay with resistive load
0 to	20 ms
1 to	0.5 ms
Switching frequency
with resistive load, max.	1000 Hz
with inductive load, max.	0.5 Hz
on lamp load, max.	8 Hz
Aggregate current of outputs (per group)
all mounting positions
up to 60 °C, max.	2 A
Cable length
Cable length unshielded, max.	100 m
Encoder
Connectable encoders
2-wire sensor	Yes
Permissible quiescent current (2-wire sensor), max.	1.5 mA
Interfaces
PROFIBUS DP
Transmission rate, max.	12 Mbit/s
SYNC capability	Yes
FREECE capability	Yes
Communication functions
Bus protocol/transmission protocol	PROFIBUS DP
Interrupts/diagnostics/status information
Diagnostics indication LED
Bus fault BF (red)	Yes
Run mode RUN (green)	Yes
Status indicator digital input (green)	Yes
Galvanic isolation
between electronic block and PROFIBUS DP	Yes
Galvanic isolation digital inputs
Galvanic isolation digital inputs	No
Galvanic isolation digital outputs
Galvanic isolation digital outputs	Yes
between the channels, in groups of	8
Degree and class of protection
IP20	Yes
Ambient conditions
Operating temperature
horizontal installation, min.	0 °C
horizontal installation, max.	60 °C; 40°C for other mountings
Air pressure
permissible range, min.	795 hPa
permissible range, max.	1080 hPa
Relative humidity
Operation, min.	15 %
Operation, max.	95 %; RH class 2 in accordance with IEC 1131-2
Vibrations
Operation, checked according to IEC 60068-2-6	Yes; IEC 68, Part 2-6; 10 to 57 Hz; (constant amplitude 0.075 mm); 57 to 150 Hz; (constant acceleration 1 g)
Shock test
checked according to IEC 60068-2-27	Yes; IEC 68, Part 2-27; half-sine, 15 g, 11 ms
Connection method
Inputs/outputs	Screw-type and spring-loaded terminals, permanent wiring; 3 and 4-wire connection
Dimensions
Width	235 mm; EB and TB
Height	130 mm; EB and TB
Depth	60 mm; EB and TB
Weight
Weight, approx.	800 g; EB and TB