| No comment |
Your Position: Home
> Control System > PLC > Siemens PLC > 6ES7133-0BH01-0XB0 SIEMENS ELECTRONIC MODULE FOR ET 200B NewCategories
6ES7133-0BH01-0XB0 SIEMENS ELECTRONIC MODULE FOR ET 200B New
Description
6ES7133-0BH01-0XB0 SIEMENS ELECTRONIC MODULE FOR ET 200B New
SIEMENS ELECTRONIC MODULE FOR ET 200B 6ES7133-0BH01-0XB0
Product Description:
SIMATIC DP, ELECTRONIC MODULE DIGITAL, FOR ET 200B, W=160MM, 8DI 24V DC; 8DO 24V DC, 0.5A MAX. 12 MBIT/S; STANDARD.
Features:
Supply voltage | |
24 V DC | Yes; L1+, L3+; value at t < 0.5 s: 35 V |
permissible range, lower limit (DC) | 18.5 V |
permissible range, upper limit (DC) | 30.2 V |
Input current | |
Current consumption, typ. | 70 mA; from L3+; logic |
Current consumption, max. | 500 mA; from L3+; sensor |
I²t | 0.05 A²·s; with starting current inrush |
Power losses | |
Power loss, max. | 3.8 W |
Hardware configuration | |
Rack | |
Required terminal block | TB1/DC, TB1-4/DC, TB3/DC, TB3-4/DC |
Digital inputs | |
Number/binary inputs | 8 |
Input voltage | |
Rated value, DC | 24 V |
for signal "0" | -30 to +5 V |
for signal "1" | 13 to 30 V |
Input current | |
for signal "1", typ. | 4 mA; At 24 V min. 2 mA |
Input delay (for rated value of input voltage) | |
for standard inputs | |
at "0" to "1", min. | 2 ms |
at "0" to "1", max. | 3 ms |
Cable length | |
Cable length unshielded, max. | 100 m |
Digital outputs | |
Number/binary outputs | 8 |
Functionality/short-circuit strength | Yes; Electronic |
Limitation of inductive shutdown voltage to | typically (L1+) -55 V |
Lamp load, max. | 5 W |
Controlling a digital input | Yes |
Output voltage | |
Rated value (DC) | 24 V |
for signal "0", max. | 2 V; Idling |
for signal "1", min. | UE -3 V |
Output current | |
for signal "1" permissible range for 0 to 60 °C, min. | 0.5 A; in one group |
for signal "0" residual current, max. | 1 mA |
Output delay with resistive load | |
0 to "1", max. | 20 ms |
1 to "0", max. | 0.5 ms |
Switching frequency | |
with resistive load, max. | 100 Hz |
with inductive load, max. | 0.5 Hz |
on lamp load, max. | 8 Hz |
Aggregate current of outputs (per group) | |
all mounting positions | |
up to 60 °C, max. | 2 A |
Cable length | |
Cable length unshielded, max. | 100 m |
Encoder | |
Connectable encoders | |
2-wire BEROS | Yes |
permissible quiescent current (2-wire BEROS), max. | 1.5 mA |
Interfaces | |
PROFIBUS DP | |
Transmission rate, max. | 12 Mbit/s |
SYNC capability | Yes |
FREECE capability | Yes |
Communication functions | |
Bus protocol/transmission protocol | PROFIBUS DP |
Interrupts/diagnostics/status information | |
Diagnostics indication LED | |
Bus fault BF (red) | Yes |
Run mode RUN (green) | Yes |
Status indicator digital input (green) | Yes |
Galvanic isolation | |
between electronic block and PROFIBUS DP | Yes |
Galvanic isolation digital inputs | |
Galvanic isolation digital inputs | No |
Galvanic isolation digital outputs | |
Galvanic isolation digital outputs | No |
between the channels, in groups of | 8 |
Ambient conditions | |
Operating temperature | |
horizontal installation, min. | 0 °C |
horizontal installation, max. | 60 °C; 40°C for other mountings |
Air pressure | |
permissible range, min. | 795 hPa |
permissible range, max. | 1080 hPa |
Relative humidity | |
Operation, min. | 15 % |
Operation, max. | 95 %; RH class 2 in accordance with IEC 1131-2 |
Vibrations | |
Operation, checked according to IEC 60068-2-6 | Yes; IEC 68, Part 2-6; 10 to 57 Hz; (constant amplitude 0.075 mm); 57 to 150 Hz; (constant acceleration 1 g) |
Shock test | |
checked according to IEC 60068-2-27 | Yes; IEC 68, Part 2-27; half-sine, 15 g, 11 ms |
Degree and class of protection | |
IP20 | Yes |
Connection method | |
Inputs/outputs | Screw-type and spring-loaded terminals, permanent wiring; 3 and 4-wire connection |
Dimensions | |
Width | 160 mm; EB and TB |
Height | 130 mm; EB and TB |
Depth | 60 mm; EB and TB |
Weight | |
Weight, approx. | 650 g; EB and TB |
6ES7133-0BH01-0XB0 SIEMENS ELECTRONIC MODULE FOR ET 200B NewSIEMENS ELECTRONIC MODULE FOR ET 200B 6ES7133-0BH01-0XB0
Product Description:
SIMATIC DP, ELECTRONIC MODULE DIGITAL, FOR ET 200B, W=160MM, 8DI 24V DC; 8DO 24V DC, 0.5A MAX. 12 MBIT/S; STANDARD.
Features:
Supply voltage
24 V DC
Yes; L1+, L3+; value at t < 0.5 s: 35 V
permissible range, lower limit (DC)
18.5 V
permissible range, upper limit (DC)
30.2 V
Input current
Current consumption, typ.
70 mA; from L3+; logic
Current consumption, max.
500 mA; from L3+; sensor
I²t
0.05 A²·s; with starting current inrush
Power losses
Power loss, max.
3.8 W
Hardware configuration
Rack
Required terminal block
TB1/DC, TB1-4/DC, TB3/DC, TB3-4/DC
Digital inputs
Number/binary inputs
8
Input voltage
Rated value, DC
24 V
for signal "0"
-30 to +5 V
for signal "1"
13 to 30 V
Input current
for signal "1", typ.
4 mA; At 24 V min. 2 mA
Input delay (for rated value of input voltage)
for standard inputs
at "0" to "1", min.
2 ms
at "0" to "1", max.
3 ms
Cable length
Cable length unshielded, max.
100 m
Digital outputs
Number/binary outputs
8
Functionality/short-circuit strength
Yes; Electronic
Limitation of inductive shutdown voltage to
typically (L1+) -55 V
Lamp load, max.
5 W
Controlling a digital input
Yes
Output voltage
Rated value (DC)
24 V
for signal "0", max.
2 V; Idling
for signal "1", min.
UE -3 V
Output current
for signal "1" permissible range for 0 to 60 °C, min.
0.5 A; in one group
for signal "0" residual current, max.
1 mA
Output delay with resistive load
0 to "1", max.
20 ms
1 to "0", max.
0.5 ms
Switching frequency
with resistive load, max.
100 Hz
with inductive load, max.
0.5 Hz
on lamp load, max.
8 Hz
Aggregate current of outputs (per group)
all mounting positions
up to 60 °C, max.
2 A
Cable length
Cable length unshielded, max.
100 m
Encoder
Connectable encoders
2-wire BEROS
Yes
permissible quiescent current (2-wire BEROS), max.
1.5 mA
Interfaces
PROFIBUS DP
Transmission rate, max.
12 Mbit/s
SYNC capability
Yes
FREECE capability
Yes
Communication functions
Bus protocol/transmission protocol
PROFIBUS DP
Interrupts/diagnostics/status information
Diagnostics indication LED
Bus fault BF (red)
Yes
Run mode RUN (green)
Yes
Status indicator digital input (green)
Yes
Galvanic isolation
between electronic block and PROFIBUS DP
Yes
Galvanic isolation digital inputs
Galvanic isolation digital inputs
No
Galvanic isolation digital outputs
Galvanic isolation digital outputs
No
between the channels, in groups of
8
Ambient conditions
Operating temperature
horizontal installation, min.
0 °C
horizontal installation, max.
60 °C; 40°C for other mountings
Air pressure
permissible range, min.
795 hPa
permissible range, max.
1080 hPa
Relative humidity
Operation, min.
15 %
Operation, max.
95 %; RH class 2 in accordance with IEC 1131-2
Vibrations
Operation, checked according to IEC 60068-2-6
Yes; IEC 68, Part 2-6; 10 to 57 Hz; (constant amplitude 0.075 mm); 57 to 150 Hz; (constant acceleration 1 g)
Shock test
checked according to IEC 60068-2-27
Yes; IEC 68, Part 2-27; half-sine, 15 g, 11 ms
Degree and class of protection
IP20
Yes
Connection method
Inputs/outputs
Screw-type and spring-loaded terminals, permanent wiring; 3 and 4-wire connection
Dimensions
Width
160 mm; EB and TB
Height
130 mm; EB and TB
Depth
60 mm; EB and TB
Weight
Weight, approx.
650 g; EB and TB
