H3YN-4 AC220V Time Relay NEW

H3YN-4 AC220V OMRON Time Relay NEW

OMRON Time Relay H3YN-4 AC220V                     

Product Description:

Minimizes stock.

Pin configuration compatible with MY Power Relay.

Standard multiple operating modes and multiple time ranges.

Conforms to EN61812-1 and IEC60664-1 for Low Voltage, and EMC Directives.

Specifications:

Ratings
Item	H3YN-2/-4/-4-Z	H3YN-21/-41/-41-Z
Time ranges	0.1 s to 10 min (1 s, 10 s, 1 min,	0.1 min to 10 h (1 min, 10 min, 1 h, or
	or 10 min max. selectable)	10 h max. selectable)
Rated supply voltage	24, 100 to 120, 200 to 230 VAC (50/60 Hz) (See note 1.)
	12, 24, 48, 100 to 110, 125 VDC (See note 2.)
Pin type	Plug-in
Operating mode	ON-delay, interval, flicker OFF start, or flicker ON start (selectable with DIP switch)
Operating voltage range	85% to 110% of rated supply voltage (12 VDC: 90% to 110% of rated supply voltage) (See note 3.)
Reset voltage	10% min. of rated supply voltage (See note 4.)
Power consumption	100 to 120 VAC:
	Relay ON: Approx. 1.8 VA (1.6 W) at 120 VAC, 60 Hz
	Relay OFF: Approx. 1 VA (0.6 W) at 120 VAC, 60 Hz
	200 to 230 VAC:
	Relay ON: Approx. 2.2 VA (1.8 W) at 230 VAC, 60 Hz
	Relay OFF: Approx. 1.5 VA (1.1 W) at 230 VAC, 60 Hz
	24 VAC:
	Relay ON: Approx. 1.8 VA (1.4 W) at 24 VAC, 60 Hz
	Relay OFF: Approx. 0.3 VA (0.2 W) at 24 VAC, 60 Hz
	12 VDC:
	Relay ON: Approx. 1.1 W at 12 VDC
	Relay OFF: Approx. 0.1 W at 12 VDC
	24 VDC:
	Relay ON: Approx. 1.1 W at 24 VDC
	Relay OFF: Approx. 0.1 W at 24 VDC
	48 VDC:
	Relay ON: Approx. 1.2 W at 48 VDC
	Relay OFF: Approx. 0.3 W at 48 VDC
	100 to 110 VDC:
	Relay ON: Approx. 1.6 W at 110 VDC
	Relay OFF: Approx. 0.4 W at 110 VDC
	125 VDC:
	Relay ON: Approx. 1.6 W at 125 VDC
	Relay OFF: Approx. 0.4 W at 125 VDC
Control outputs	DPDT: 5 A at 250 VAC, resistive load (cosΦ = 1)
	4PDT: 3 A at 250 VAC, resistive load (cosΦ = 1)

Note:

1.Do not use the output from an inverter as the power supply.

2.Single-phase, full-wave-rectified power supplies can be used.

3.When using the H3YN continuously in any place where the ambient temperature is in a range of 45°C to 50°C, supply 90% to 110% of the rated supply voltages (supply 95% to 110% with 12 VDC type).

4.Set the reset voltage as follows to ensure proper resetting.

100 to 120 VAC: 10 VAC max.

200 to 230 VAC: 20 VAC max.

100 to 110 VDC: 10 VDC max.

Characteristics
Item	H3YN-2/-21/-4/-41
Accuracy of	±1% FS max. (1 s range: ±1%±10 ms max.)
operating time
Setting error	±10%±50 ms FS max.
Reset time	Min. power-opening time: 0.1 s max. (including halfway reset)
Influence of voltage	±2% FS max.
Influence of temperature	±2% FS max.
Insulation resistance	100 MΩ min. (at 500 VDC)
Dielectric strength	2,000 VAC, 50/60 Hz for 1 min (between current-carrying terminals and exposed non-current-carrying metal parts) (see note 1)
	2,000 VAC, 50/60 Hz for 1 min (between operating power circuit and control output)
	2,000 VAC, 50/60 Hz for 1 min (between different pole contacts; 2-pole model)
	1,500 VAC, 50/60 Hz for 1 min (between different pole contacts; 4-pole model)
	1,000 VAC, 50/60 Hz for 1 min (between non-continuous contacts)
Vibration resistance	Destruction: 10 to 55 Hz, 0.75-mm single amplitude for 1 h each in 3 directions
	Malfunction: 10 to 55 Hz, 0.5-mm single amplitude for 10 min each in 3 directions
Shock resistance	Destruction: 1,000 m/s2
	Malfunction: 100 m/s2
Ambient temperature	Operating: - 10°C to 50°C (with no icing)
	Storage: - 25°C to 65°C (with no icing)
Ambient humidity	Operating: 35% to 85%
Life expectancy	Mechanical: 10,000,000 operations min. (under no load at 1,800 operations/h)
	Electrical: DPDT:
	500,000 operations min. (5 A at 250 VAC, resistive load at 1,800 operations/h)
	4PDT:
	200,000 operations min. (H3YN-4-Z/-41-Z: 100,000 operations min.)
	(3 A at 250 VAC, resistive load at 1,800 operations/h)
Impulse withstand	Between power terminals:
voltage	3 kV for 100 to 120 VAC, 200 to 230 VAC, 100 to 110 VDC, 125 VDC
	1 kV for 12 VDC, 24 VDC, 48 VDC, 24 VAC
	Between exposed non-current-carrying metal parts:
	4.5 kV for 100 to 120 VAC, 200 to 230 VAC, 100 to 110 VDC, 125 VDC
	1.5 kV for 12 VDC, 24 VDC, 48 VDC, 24 VAC
Noise immunity	±1.5 kV, square-wave noise by noise simulator (pulse width: 100 ns/1 μs, 1-ns rise)
Static immunity	Destruction: 8 kV
	Malfunction: 4 kV
Degree of protection	IP40
Weight	Approx. 50 g
EMC	(EMI) EN61812-1
	Emission Enclosure: EN55011 Group 1 class A
	Emission AC Mains: EN55011 Group 1 class A
	(EMS) EN61812-1
	Immunity ESD: EN61000-4-2: 8 kV air discharge (level 3)
	Immunity RF-interference from AM Radio Waves:
	EN61000-4-3: 10 V/m (80 MHz to 1 GHz) (level 3)
	Immunity Burst: EN61000-4-4: 2 kV power-line (level 3)
	2 kV I/O signal-line (level 4)
	Immunity Surge: EN61000-4-5: 2 kV line to ground (level 3)
	1 kV line to line (level 3)
Approved standards	UL508, CSA C22.2 No. 14, Lloyds
	Conforms to EN61812-1 and IEC60664-1. (2.5 kV/2 for H3YN-2/-21, 2.5 kV/1 for H3YN-4/-41, H3YN-4-Z/-41-Z)
	Output category according to EN60947-5-1.

Note:Terminal screw sections are excluded.