G7T-1122S RELAY New

G7T-1122S OMRON RELAY New

Product Description?

Product classification	Monostable relays Standard type
Coil ratings	12 VDC 42 mA
Coil resistance	290 Ohm
Operate voltage (Set voltage)	80% Max.
Release voltage (Reset voltage)	10% Min.
Max. voltage	110% (of rated voltage)
Power consumption (Single stable)	0.5 W
Operating indicator	Mech indicator
Coil surge killer	Not equipped
Contact Type	SPST-NO
Contact method	Bifurcated crossbar
Contact material	Contact body material: Ag Contact finish: AgAu-clad
Contact rated load	220 VAC 2 A (Resistive load) 220 VAC 1 A (Inductive load (cos phi = 0.4)) 24 VDC 1 A (Resistive load) 24 VDC 0.5 A (Inductive load (L/R = 7 ms))
Maximum switching voltage	250 VAC (Resistive load) 250 VAC (Inductive load (cos phi = 0.4)) 125 VDC (Resistive load) 125 VDC (Inductive load (L/R = 7 ms))
Maximum switching current	AC: 1 A (Resistive load) AC: 1 A (Inductive load (cos phi = 0.4)) DC: 1 A (Resistive load) DC: 1 A (Inductive load (L/R = 7 ms))
Maximum switching power	AC: 110 VA (Resistive load) DC: 24 W (Resistive load) DC: 12 W (Inductive load (L/R = 7 ms))
Failure rate	100 uA at 1 VDC (failure level: P Reference value)
Ambient temperature	Operating: -40 to 70 CEL (with no icing or condensation)
Ambient humidity	Operating: 5 to 85% RH (with no icing or condensation)
Characteristics
Contact resistance	Max. 50 mOhm, Measuring the voltage drop across the contacts by applying test voltage/current as 5 VDC 1 A
Operating time (set time)	15 ms Max.
Release time (Reset time)	15 ms Max.
Max.operating frequency (Mechanical)	18000 opn./h
Max.operating frequency (Erectrical)	1800 opn./h
Insulation resistance	Between coil and contacts: 100 MOhm Min. (at 500 VDC) Between contacts of same polarity: 100 MOhm Min. (at 500 VDC)
Dielectric strength	Between coil and contacts: 2000 VAC 50/60 Hz for 1 min (Leakage current 2 mA 50/60 Hz 1 min) Between contacts of same polarity: 1000 VAC 50/60 Hz for 1 min (Leakage current 2 mA 50/60 Hz 1 min)
Vibration resistance (Destruction)	10 to 55 to 10 Hz 0.5-mm single amplitude (1.0-mm double amplitude) for 2 hours each in X, Y, and Z directions (No defect in appearance and construction after applying variable vibration in each directions for 2 hours.)
Vibration resistance (Malfunction)	10 to 55 to 10 Hz 0.5-mm single amplitude (1.0-mm double amplitude) in each direction
Shock resistance (Destruction)	200 m/s**2 each direction 3 times (No defect in appearance and construction after applying shock in each directions 3 times.)
Shock resistance (Malfunction)	200 m/s**2
Endurance (Mechanical)	50000000 operations Min.
Endurance (Electrical)	50000 operations Min.
Protective structure	Closed type (cover)
Applicable standard (UL)	Standard No.: UL508 File No.: E41643
Applicable standard (CSA)	Standard No.: C22.2 No.14 File No.: LR35535
Terminal structure	Plug-in
Weight	Approx. 17 g