FRN315G11S-4CX Inverter 315kw Universal

FRN315G11S-4CX FUJIFILM Inverter 315kw Universal

Features:
? PG vector control

Suitable for offset printing presses that require the use of high-precision positioning control.

? improve the amount of Fuji Electric's unique dynamic torque control performance

Dynamic torque vector control is a unique advanced technology of Fuji Electric Company.Dynamic torque vector control, and fully take into account the voltage error of the main motor circuit device equipped with a motor constant tuning and the monitoring of new magnetic flux, so even in low-speed 0.3Hz, but also can achieve high starting torque of 200%.

? improve the overload tolerance

Compared with the previous product of the Fuji Electric Company, extend overload rated short period of time the maximum amount of acceleration and deceleration function, resulting in improved cutting machinery, handling mechanical work efficiency.
? overload tolerance: 2% to 3 seconds / 150% -1

? Increase the power of built-in braking resistor models

As standard built-in brake circuit in 22kW following models apply to the use of the regenerative load more up and down the handling devices.
(7.5kW following built-in braking resistor)
* If you want to further improve the power, you can order the production 400V: 30kW ~ 110kW models.

? maximize the performance of general-purpose motor

? sensorless vector control

Suitable for hanging baskets parking uses high-start torque.

? improve the impact load the corresponding capacity

Torque response to cope with the sharp load changes.By controlling the flux, the changes in motor speed control in the minimum, so that the vibration to be controlled.Most suitable for cutting machinery and other equipment requiring a stable speed.

? improve the response performance of the operation command

Further improve the response of the past high evaluation of the operation instruction terminals, shortest response time.
Shorten the time interval of each cycle, suitable for repeated running more operating purposes.

Configure the USB interface, through the flexible use of PC software, making information management more convenient (optional remote operation panel)
? converter body's memory of the operation panel, you can save all kinds of information do not need to select the place, can also be implemented to confirm the operation.
? at the production site can send information through the operation panel of the USB interface directly to the computer (PC loader).
? You can efficiently carry out the regular life of the collection of information.
? real-time scanning capabilities, be able to confirm the unusual circumstances of the equipment and machinery.

Feature
One without a converter, the use of ordinary sale USB cable (mini B) you can connect your computer directly.Available through online and inverter connected to the computer.
(2) through the flexible use of the PC loader can be achieved (1) - (5) drive support functions.
(1) Function code data editing, copy
(2) operation monitoring, real-time scanning
(3) fault history information (last four)
(4) maintenance of information
(5) the history of track (recently configuration)

A wide range of uses
? the functions conducive to speed instruction

Can be issued by the pulse generator input pulse train (single-phase pulse + instruction symbol) to the speed control instructions.
(Maximum pulse input 100kHz)

? configuration ratio operation

This feature applies to adjustments handling machine system.Relative to the main speed, you can set several slave axis ratio of the frequency of instruction.Can easily adjust to changes in load handling machine handling speed.

? complete brake circuit protection function
By monitoring the braking transistor action, to protect the braking resistor.Detect abnormalities of the braking transistor output dedicated signal.Using these signals via the external set to cut off the input power supply circuit in the inverter to start protection.

? to prevent the fall of goods
In the upper and lower handling process, improve the accuracy of the brake signal.Torque value added to the monitored current value output brake signal, the frequency, you can easily adjust the brake timing.
? the most suitable winding pendulum control function

Contrast to the target value and feedback value, plus or minus baseline speed PID operation results.Because the calculus part of the gain of the PID (proportional band), low (W) is set, therefore, can be applied to the automatic control system, speed control, and require rapid response.

? feature-rich, versatile

(1) Analog Input: 2 input voltage (with polarity) and a current input (2)
Less water stop (water is low, and can be pressurized before it stopped running) (3) 3:00-linear V / f mode (4) with fault simulation output function (5) can choose to motor 4 (6) S-shape acceleration decelerationrange is set PID feedback disconnection detection (7)

? Positioning control (PG option card)

With the most suitable for handling machinery and require the use of high-precision positioning.By the position controller (APR) + PG vector control, greatly improved the precision of position control.Shorten the positioning time, it is useful to shorten the interval period.

• through the parameter settings can easily implement the logic input and output.Around the circuit the simple.
With servo lock function (PG option card)

? stop timing and braking torque for handling machinery and other motor position positioning adjustments.Have to stop during the convenient features to keep the torque from the external add torque and requirements.To shorten the cycle time by shortening the deceleration time.
Design life of 10 years
Inverter internal variety of the design life of the life of components is extended to 10 years.Therefore, the equipment maintenance cycle will be extended.

The main circuit capacitor 10 years
Printed board electrolytic capacitor 10 years
Cooling fan for 10 years

Maintenance of equipment performance life of early warning function.
75KW DCR4 above to be connected to the DC reactor (option)