Delta Inverter VFD drive VFD001L21A 1Phase 220V 0.1kW 0.125HP 1~120Hz Wood cutting &Wire drawing

1 Phase to 3 Phase Delta VFD Drive 220V 0.1KW 0.125H VFD001L21A Inverter

 

 

Sub-fractional low cost AC Drive. Specifically designed for low horsepower applications with built-in EMI filter to efficiently reduce electromagnetic interference and to conform to the CE EMI directive.

 

Specifications 

1. 16-bit microprocessor controlled SVPWM output.

2. Low noise; carrier frequency up to 10kHz.

3. Controlled reversing.

4. 2 inputs and 1output terminal for external controls.

5. Adjustable V/F curve.

6. Adjustable accel/decal time

7. RS-485 communication (Baud rate 9600)

8. Option: Programmable Keypad (VFD-PU02)

 

Applications

Simple wood cutting, conveyer belt, wire drawing machine, etc

Standard Specifications:

Voltage Class			115V Class				230V Class
Model Number VFD-XXX   L XXA/B			40W		001		40W		001
Weight  g (lb) A (standard)			270 (0.60)		440 (0.97)		260 (0.57)		430 (0.95)
Weight  g (lb) B (build-in EMI filter)			350 (0.77)		525 (1.16)		340 (0.75)		510 (1.12)
Max. Applicable Motor Output (W)			25/40		60/100		25/40		60/100
Output Rating	Rated Output Capacity (VA)		106/152		212/303		106/152		212/303
	Rated Output Current (A)		0.28/0.4		0.56/0.8		0.28/0.4		0.56/0.8
	Maximum Output Voltage (V)		Two times proportion to Input Voltage				Proportional to Input Voltage
	Rated Frequency (Hz)		1.00 to 120.00 Hz
Input Rating	Rated Voltage/Frequency		Single phase 100 to 120 VAC 50/60 Hz				Single phase 200 to 240 VAC 50/60Hz
	Voltage/Freq. Tolerance		Voltage:  ±10%,  Frequency:  ±5%
	Input Current (A)		1.1A	1.5A	2.2A	3.0A	0.5A	0.7A	1.0A	1.4A
Control Characteristics	Control Systems		SVPWM (Space Vector Pulse Width Modulation, carrier frequency 10kHz)
	Torque Setting		High/Low, Switching
	Overload Endurance		150% of rated current for 1 minute
	Accel/Decel Time		0.05 to 30.0 seconds
	Torque Promotion		Torque Boots: 0 or 8%
Operation Characteristics	Frequency Setting		Potentiometer
	Operation Setting Signal	Panel	RUN/STOP, FORWARD/REVERSE
		Ext. Terminal	RUN/STOP, FORWARD/REVERSE, RS-485
	Output Indiction	Panel	Fault Indication (LED Flash)
		Ext. Terminal	Fault Indication (Open Collector)
Protection			Self-testing, Over Voltage, Over Current, Under Voltage, Overload, Overheating, Thermal.
Cooling			Natural air-cooling
Environment	Installation Location		Altitude 1,000m or lower, keep from corrosive gasses, liquid and dust
	Pollution Degree		2
	Ambient Temperature		-10oC to 40oC (Non-Condensing and not frozen)
	Storage Temperature		-20oC to 60oC
	Ambient Humidity		Below 90% RH (non-condensing)
	Vibration		9.80665m/s2  (1G) less than 20Hz, 5.88m/s2 (0.6G) at 20 to 50Hz

Basic Wiring Diagram:

Users must connect wiring according to the following circuit diagram shown below.  

Installation Dimension: