KINCO K408CN-40AR PLC CPU AC85-265V input 24 output 16 relay 2COM CANOpen original brand new

KINCO K408CN-40AR PLC CPU AC85-265V input 24 output 16 relay 2COM CANOpen original brand new

Specification

Model	CPU408CN
	K408CN-40AT	K408CN-40AR	K408CN-40AX
Technical Specification
CPU	16-Bit Industrial
Execution Speed	Typical Bool Instruction Time: <0.36 μS
	Word Operation Time: <48μS
	Arithmetic Operation Time for Integers: <65μS
	Arithmetic Operation Time for Floating Points: <150μS
DI Points	24X DC24V
DO Points	16XDC24V	16Xrelay	4X DC24V+12Xrelay
User Program Memory	FRAM, 32KB/About 4,000 Steps
Program Backup	Permanent Storage, Without the Need of Battery
Memory Area	Variable Storage Area (V Area): 4KB
	System Storage Area (SM Area): 300 Bytes
	Internal Storage Area (M Area): 32 Bytes
Data Retention Characteristic	Configure with the Programming Software: V Area, C (Counter) Area
Retention Mode and Period	Adopt Super Capacitors and Support a Retention Period of Not Less than 144 Hours Upon Power Failure Under Normal Temperature.
Data Backup Characteristic	Perform Backup Operations VB3648~VB3902 According to User Instructions, 255 Bytes in Total
Backup Mode and Time	FRAM, Permanent Backup
Floating Points	Supported; the whole V area can be used for floating points
Programming Language Supported	Ladder Drawing (LD), Instruction List (IL)
Instruction Set	Basic instructions: 114; expansion instructions: 420
Password Protection	Yes
Max. I/O	Digital data: 280 in total (256 DI and 256 DO respectively);
	Analog data: 60 in total (32AI and 32 AO respectively)
Counter	256
Operation Mode of Counter	Addition, subtraction
Counter Range	-32768~32767
Counting Value Retention Function	Yes
Timer	256
	1 ms Time Base: 4
	10 ms Time Base: 16
	100 ms Time Base: 236
High-speed Counter	6 High-Speed Counters
	Where, Single-Phase Counters: 6, With a Maximum Frequency of 30 KHz
	Where, Dual-Phase Counters: 4, with a Maximum Frequency of 20 KHz
Pulse Output	2, PTO (Pulse Train Output)/PWM (Pulse Width Modulation Output);
	Maximum Output Frequency: 20 KHz(Note: the relay output CPU does not have high speed pluse function)
Analog Potentiometer	2, 10-bit Resolution, Values Corresponding to Internal Registers
Interruption Function	Timing Interruption: 2, 1ms Resolution;
	Timer Interruption: T2/T3, 1ms Resolution;
	Edge Interruption: 4, Rising Edge or Falling Edge Optional;
	High-Speed Interruption, Communication Interruption
Real-time Clock	Yes, With an Error Not Greater than 2 Minutes/Month Under a Temperature of 25°C
	The user can use the Software to Set/Read: Year, Month, Day, Hour, Minute, Second, Week. Adopt Super Capacitors and Support a Retention Period of Not Less than 144 Hours Upon Power Failure Under Normal Temperature.
Number of Connectable Expansion Modules	15; Regardless of Types
COM Port	2, RS232 or RS485;
	Supported Working Modes: Programming,
	Modbus-RTU (Master/Slave), Free Protocol
Equipment Connected with COM Port	RS232/RS485: PC (for programming), third-party HMI panel, Third-Party Serial Communication Equipment (For Example, Instruments, Bar Code Reader, etc.)
Input Power Supply	AC85~265V
Sensor Load Power Supply	DC24V, Max. 500 mA
Dimensions (L*W*H)	200X114X70mm