IC697CMM742 GE PLC

IC697CMM742 GE PLC

GE Communications Modules IC697CMM742

Product Description:

Connects IC697 PLC to an IEEE 802.3 CSMA/CD 10Mbps Ethernet LAN via one of three network ports: 10BaseT, 10Base2, or AUI. 10BaseT and 10Base2 network ports provide direct connection to 10BaseT or 10Base2 network without an external transceiver. Standard 15-pin AUI network port allows choice of 10Base5, 10Base2, 10BaseT, 10BaseF, or 10Broad36 medium with user-supplied 802.3-compatible transceiver Firmware is pre-loaded for easy installation and is maintained indefinitely; firmware is easily upgraded in-system from PC attached to RS-485 serial port

The Ethernet Interface provides:

[1] Data exchange using configuration-based and logic-based Ethernet Global Data

[1] TCP/IP communication services using SRTP

[1] Full PLC programming and configuration services

[1] Comprehensive station management and diagnostic tools.

Features:

Specifications
Module Operating Voltage	+5 VDC, +12 VDC (from PLC power supply)
Module Current Drain	2.0 Amps (+5 VDC), typical
	0.5 Amps (+12 VDC), maximum when powering an external AUI transceiver
Module Operating Temperature	0? to +55? (32[1]F to 131[1]F), ambient
LED Indicators	MODULE OK
	LAN ONLINE
	SERIAL  ACTIVE
	STATUS
Connectors	– Station Manager (RS-232) Port: 6-pin female RJ-11
	– Software Load (RS-485) Port: 15-pin female D-connector
	–  10BaseT  Port: 8-pin female RJ-45
	–  AUI Port: 15-pin female D-connector with slide-lock
	– 10Base2 port: female BNC connector
Fuse, Replaceable	5 x 20mm, 250V, 1.0A, slow acting
Interface  Specifications:
LAN	IEEE 802.2 Logical Link Control Class I
	IEEE 802.3 CSMA/CD  Medium  Access Control 10Mbps
Serial Ports	Station Mgr Port: RS-232 DTE 300 - 19200 bps
	Software Load Port: RS-485 DTE 300 - 19200 bps
Network Ports	10BaseT Port: Ethernet, IEEE 802.3 CSMA/CD
	10Base2 Port: Ethernet, IEEE 802.3 CSMA/CD
	AUI Port: Ethernet, IEEE 802.3 CSMA/CD (transceiver SQE must be enabled)