D4B-4116N Travel Switch NEW

D4B-4116N OMRON Travel Switch NEW

OMRON Travel Switch D4B-4116N     

Product Description:

Direct opening mechanism (NC contacts only) added to enable opening contacts when faults occur, such as fused contacts.

Safety of lever settings ensured using a mechanism that engages a gear between the operating position indicator plate and the lever.

Equipped with a mechanism that indicates the applicable operating zone, as well as push-button switching to control left and right motion.

Head seal structure strengthened to improve seal properties (TÜV: IEC IP67, UL: NEMA 3, 4, 4X, 6P, and 13).

Wide standard operating temperature range:-40 to 80°C (standard type).

Certified standards: UL, CSA, EN (TÜV), and CCC. 

Specifications:

Degree of protection *1		IP67 (EN60947-5-1)
Durability *2	Mechanical	30,000,000 operations min. (snap-action)
		10,000,000 operations min. (slow-action)
	Electrical	500,000 operations min. (10 A resistive load at 250 VAC)
Operating speed		1 mm/s to 0.5 m/s
Operating frequency	Mechanical	120 operations/minute
	Electrical	30 operations/minute
Contact resistance		25 mΩ max.
Minimum applicable load *3		General load 180 mA resistive load at 5 VAC
		Gold-clad contact 20 mA resistive load at 5 VAC
		(N-level reference value)
Rated insulation voltage (Ui)		600 V (EN60947-5-1)
Rated frequency		50/60 Hz
Protection against electric shock		Class I (with ground terminal)
Pollution degree (operating environment)		3 (EN60947-5-1)
Impulse withstand voltage	Between terminals	2.5 kV (snap-action)/4 kV (slow-action)
(EN60947-5-1)	of same polarity
	Between terminals	4 kV (slow-action)
	of different polarity
	Between each	4 kV
	terminal and ground
Insulation resistance		100 MΩ min. (at 500 VDC) between terminals of the same polarity
		and between each terminal and non-current-carrying part
Contact gap		2 × 2 mm min. (slow-action)
		2 × 0.5 mm min. (snap-action)
Vibration resistance	Malfunction	10 to 55 Hz, 0.75 mm single amplitude
Shock resistance	Destruction	1,000 m/s2 min.
	Malfunction	300 m/s2 min.
Conditional short-circuit current		100 A (EN60947-5-1)
Conventional enclosed thermal current (Ithe)		20 A (EN60947-5-1)
Ambient operating temperature		-40 to 80°C (with no icing)
Ambient operating humidity		95% max.
Weight		Approx. 250 g

 

Note:

1.The above values are initial values.

2.The above values may vary depending on the model. Consult your OMRON sales representative for details.

*1.The degree of protection is tested using the method specified by the standard (EN60947-5-1). Confirm that sealing properties are sufficient for the operating conditions and environment beforehand.

*2.The durability is for an ambient temperature of 5 to 35°C and ambient humidity of 40% to 70%. For further conditions, consult your OMRON sales representative.

*3.The above values may vary depending on switching frequency, environmental condition, and relativity level, consult your OMRON sales representative.