AFPX-C40T FP-X C40T Panasonic 24 Point Input 16DO Transistor NPN New Original 1Year Warranty

FP-X C40T AFPX-C40T Panasonic PLC AC100-240V 24 DC input  16 NPN output FP-X Control Unit Original New

Features 

•     High-speed Operation

The 32-bit RISC processor provides the top-level processing speed in compact PLCs. The scan time is 2 ms or less for 5,000 steps. A high-speed PLC is indispensable for enhancing the functionality of equipment.

•     Large Capacity Program Memory

FP-X, which is equipped with 32k steps*2 program memory, is ideal for fully covering the increasing functions, such as communications, positioning, and analog control. The sufficient program capacity can also support future equipment modifications.

•     Independent Comment Memory

There are difficulties with program management on a PC, such as identifying the latest program. The use of the program in the PLC of equipment in operation is often regarded as the best option. Since FP-X has an independent comment memory, all comments can be stored in the PLC together with programs, facilitating program management and maintenance.

•     Maximum Number of I/O Points

Since up to eight expansion units can be connected to one control unit, the maximum number of I/O points is 300. Furthermore, with the add-on cassette and expansion FP0 adapter connected, the number of I/O points can be increased to 382.

•     Built-in 4-axis Pulse Output (Transistor Output Type)

The transistor output type C14 comes with 3-axis while C30/60 comes with 4-axis pulse output built-in the control unit. The multi-axis control, which previously required a higher-level PLC or additional positioning unit, or two or more PLC units, can now be achieved with only one FP-X transistor output type unit in a small space at a low cost. In addition, as this type does not require a pulse I/O cassette needed for a relay output type, other function expansion cassettes such as communication or analog input can be attached for more diversified applications.

•     Modbus-RTU

Communicates with equipment compatible with Modbus-RTU

•     Expansion Cassettes

Expansion cassettes are available for Extra digital I/O, analog, motion, Ethernet, Serial communication, etc.

General Specifications

Item			Description
			Relay output type	Transistor output type
Power supply and I/O Specifications	Power supply		100 to 240 V AC (AC power), 24 V DC (DC power)
	Input		24V DC °C common
	Output		2 A	0.5 A
	Service power supply (AC power type only)		0.15 A (C14)/ 0.4 A (C30/ C60)
Performance Specifications	Number of I/O points	C14	Input: 8 points, Output: 6 points
		C30	Input: 16 points, Output: 14 points
		C60	Input: 32 points, Output: 28 points
	I/O points when expanded	C14	Max. 328 points (When using FP0 expansion units and add-on cassette)
		C30	Max. 352 points (When using FP0 expansion units and add-on cassette)
		C60	Max. 382 points (When using FP0 expansion units and add-on cassette)
	Operation speed		0.32μs/step
	Program memory		Flash ROM built-in (no battery backup required)
	Program capcity		16 ksteps (C14), 32 ksteps (C30, C60)
	Basic instructions		111
	Applied instructions		216
	Operation memory	Internal relay ®	4096 points
		Timer/counter (T/C)	1024 points
		Data register (DT)	12285 words (C14), 32765 (C30, C60)
Special functions	Pulse catch input		14 points	14 points
	Interrupt input		14 points	14 points
	Analog I/O		Input: Max. 24 ch, Output: Max. 12 ch (When using FP0 analog unit) Input: Max. 4 ch (When using add-on cassette)
	Volume input		2 points (C14/C30), 4 points (C60)
	High-speed counter	Input of main unit	Single-phase: 8 ch x Max. 10 kHz 2-phase: 4 ch Max. 5 kHz	Single-phase: 8 ch (High-speed: 4 ch, midium-speed: 4 ch) 2-phase: 4 ch (High-speed: 2 ch, midium-speed: 2ch) With high-speed single-phase: 1 ch x Max. 100 kHz 2 ch x Max. 80 kHz 3 ch x Max. 60 kHz 4 ch x Max. 50 kHz With high-speed 2-phase: 1 ch x Max. 35 kHz 2 ch x Max. 25 kHz With medium-speed single-phase: 4 ch x Max. 10 kHz each With Medium-speed 2-phase: 2 ch x Max. 5 kHz each
		when pulse I/Ocassette installed	Single-phase: 2 ch x Max. 80 kHz, 4 ch x Max. 50 kHz 2-phase: 1 ch x Max. 30 kHz, 2 ch x Max. 25 kHz	Pulse I/O cassette cannot be installed.
	Pulse output	Input of main unit	-	With high-speed 2 ch x Max. 100 kHz For linear interpolation, compositespeed: 100 kHz With medium-speed 2 ch x Max. 20 kHz For linear interpolation, compositespeed: 20 kHz
		when pulse I/Ocassette installed	1 ch x Max. 100 kHz, 2ch x Max. 80 kHz	Pulse I/O cassette cannot be installed.
	Serial interface		RS232C.RS485, USB, Ethernet
	Network function		PLC Link, Computer link, Modem, Modbus-RTU
Other functions			Program editing during RUN, Constant scan, 8-digit password, Program

Control Units

Model Name	Power	Pulse Outputs	Modbus Rtu	Dc Inputs	Npn Outputs	Pnp Outputs	Relay Outputs	Program Size (K)
AFPX-C14P	AC100-240V	3 Axis	Yes	8		6		12
AFPX-C14PD	24VDC	3 Axis	Yes	8		6		12
AFPX-C14R	AC100-240V	No	Yes	8			6	12
AFPX-C14T	AC100-240V	3 Axis	Yes	8	6			12
AFPX-C14TD	24VDC	3 Axis	Yes	8	6			12
AFPX-C30P	AC100-240V	4 Axis	Yes	16		14		32
AFPX-C30PD	24VDC	4 Axis	Yes	16		14		32
AFPX-C30R	AC100-240V	No	Yes	16			14	32
AFPX-C30T	AC100-240V	4 Axis	Yes	16	16			32
AFPX-C30TD	24VDC	4 Axis	Yes	16	16			32
AFPX-C60P	AC100-240V	4 Axis	Yes	32		28		32
AFPX-C60PD	24VDC	4 Axis	Yes	32		28		32
AFPX-C60R	AC100-240V	No	Yes	32			28	32
AFPX-C60T	AC100-240V	4 Axis	Yes	32	28			32
AFPX-C60TD	24VDC	4 Axis	Yes	32	28			32