FX3U-USB-BD Expansion board For USB communication Mitsubishi Original Brand NEW

FX3U-USB-BD Mitsubishi PLC USB Driver Original Brand NEW

Introduction

This manual explains the installation method of the USB driver software for FX-USB-AW and FX3U-USB-BD. The FX-USB-AW and FX3U-USB-BD use the same USB driver software.

For the mounting, hardware specification and applicable standard of the FX-USB-AW or FX3U-USB-BD, refer to the each product user's manual.

Performance Specifications

FX-USB-AW

Item		Specification
Current consumption		15mA / 5V DC (5V DC power is supplied from the internal power supply of PLC) 30mA / 5V DC (5V DC power is supplied from the USB connector of personal computer)
Level Conversion		Bidirectional between RS-422 and USB (Between signals are isolated by photocoupler.)
Baud Rate		115200 bps, maximum (The baud rate is different in PLC.
Transmission standard		USB2.0 (For full speed)
Signal name (Port)	To PLC	RS-422 (MINI DIN 8Pin male)
	To a cable	USB (MINI B plug female)

FX3U-USB-BD

Item	Specification
Current consumption	15mA / 5V DC (5V DC power is supplied from the internal power supply of PLC) 30mA / 5V DC (5V DC power is supplied from the USB connector of personal computer)
Isolation	Photocoupler isolation (Between communication line and CPU)
Baud Rate	9600/19200/38400/57600/115200 bps
Transmission standard	USB2.0 (For full speed)
Port	USB (MINI B plug female)