FX3U-ENET-L Ethernet module 8 I/O Mitsubishi Original Brand New

FX3U-ENET-L Mitsubishi PLC Display Interface Module Original Brand New

Introduction

The Ethernet module is an interface module on the PLC side for connecting the FX3U/

FX3UC series PLC with the host system, such as a personal computer work station,

and other PLCs using the TCP/IP or UDP/IP communication protocol via Ethernet

(100BASE-TX, 10BASE-T).                                                                            

 

Performance Specifications

Item			Specification
Transmission specifications	Data transmission speed		100 M bps	10 M bps
	Communication mode		Full-duplex/Half-duplex
	Transmission method		Base band
	Maximum segment length		100 m (328' 1") *1
	Maximum number of nodes/connection		Cascade connection Maximum 2 stages	Cascade connection Maximum 4 stages
Transmission data storage memory	Number of simultaneously open connections allowed		4 connections Fixed buffer communication: up to 2 connections (C1 and C2) MELSOFT connection + MC protocol: up to 2 connections (C3 and C4)
	Fixed buffer		1023 word X2
	E-mail	Attached file	2048 wordsX1
		Main text	256 wordsX1
Number of I/O occupied points			8 points
Power supply			24V DC +20%, -15%, ripple (p-p) less than 5%
Allowable instantaneous power failure time			Operation can be continued upon occurrence of instantaneous power failure for 1 ms or less.
External 24V current consumption			240 mA
Number of connectable units to the main unit			1
Applicable PLC			FX3U/FX3UC PLC Ver. 2.21 or later
External dimensions			90 (3.55") (H)  55 (2.17") (W)  87 (3.43") (D) [mm] (inches)
Weight			0.3 kg (0.66 lbs)

*1  Length between the Hub and node.