PLC 2 channel weighing module DVP02LC-SL Delta New

DVP02LC-SL Delta PLC 2 channel 20-bit resolution Load Cell Module Original brand new

Introduction to DVP02LC-SL

1. Thank you for choosing Delta DVP02LC-SL load cell module. DVO02LC-SL provides 24-bit resolution applicable for 4-wire or 6-wire load cells with various eigenvalues. Therefore, the response time can be adjusted in coordination with each other according to users’ needs. On this basis, the market requirements on weight measurement can easily be met.

2. To ensure correct installation and operation of DVP02LC-SL, please read this operation manual carefully before using it. This operation manual only provides introductory information on DVP02LC-SL. For more detailed information on the theory of load cell, please refer to relevant references of literature.

3. The DVP02LC-SL load cell module is able to read/write data by using FROM/TO instructions through the DVP series PLC MPUNote

Note: The MPU (main processing unit) refers to PLC compatible with left-side extension, e.g. DVP-SV, DVP-EH2-L, DVP-SA2, DVP-SX2 series PLC.

Specifications

Rated power supply voltage/power consumption	24 VDC (-15 to +20%)/3 W
Voltage boundary	18 to 31.2 VDC
Max. current consumption	125 mA
Input signal range	+-40 mVDC
Sensibility	+5 VDC +/-10%
Internal resolution	24 bits
Communication port	RS-232, RS-485
Applicable sensor type	4-wire or 6-wire load cell
Temperature coefficient span	<=+- 50 ppm/K v. E
Temperature coefficient zero point	<= +- 0.4 uV/K
Linearity error	<= 0.02%
Response time	2, 10, 20, 40, 80 ms × number of channels
4 measuring ranges	0 to 1, 0 to 2, 0 to 4, 0 to 6 mV/V
Max. distance for connecting to load cell	100m
Max. current output	5 VDC × 300 mA
Permitted load cell resistance	40 to 4,010 ?
Common mode rejection (CMRR @50/60 Hz)	>= 100dB
Dynamic value filter	Setting range: K1 to K5
Average value filter	Setting range: K1 to K100
Isolation method	500 VAC between digital circuits and ground 500 VAC between analog circuits and ground 500 VAC between analog circuits and digital circuits
Serial connection to DVP-PLC MPU	Connectable to the left side of the MPU, numbered from 100 to 107 according to the position of the module from the closest to the farthest to the MPU.
Operation/storage	Operation: 0 to 55°C (temperature),50 to 95% (humidity), pollution degree 2 Storage: -25 to 70°C (temperature), 5 to 95% (humidity)
Vibration/shock immunity	International standards: IEC 61131-2, IEC 68-2-6 (TEST Fc)/IEC 61131-2 & IEC 68-2-27 (TEST Ea)

Product Dimension