1762-IF2OF2 AB Allen-Bradley PLC 2 differential inputs Analog I/O Module 1762 Series Original brand new

1762-IF2OF2 AB PLC 2 differential inputs Analog I/O Module 1762 Series Original brand new

1762 MicroLogix Expansion I/O

The 1762 MicroLogix expansion I/O modules are compatible with MicroLogix 1100, MicroLogix 1200, and MicroLogix 1400 controllers. If your application requires more I/O than the built-in I/O provided by the controller, add expansion I/O modules.
Install the expansion I/O modules to the right of the controller, either on a panel with two mounting screws or on a DIN rail. You can use digital and analog I/O modules in many combinations, up to the maximum supported by the controller. The current loading capacity of the controller’s built-in power supply may limit the actual number of I/O modules that can be connected to the controller.
Features

Integrated high-performance I/O busSoftware keying to prevent incorrect positioning within the systemFinger-safe terminal blocks for I/O wiringLabel to record I/O terminal designationsNetwork support includes EtherNet/IP, DeviceNet, and DH-485 (local only)Digital, analog, and specialty I/O modules available

Analog I/O Modules

Cat. No.	Inputs/Outputs	Analog Ranges	Bus Current Draw, Max.	Overall Accuracy?	Resolution Across Full Range	Typical Update Period
1762-IF4	4 differential inputs (bipolar)	Voltage: ±10V Current: 4…20 mA	40 mA at 5V DC 50 mA at 24V DC	±0.32% full scale at -20…65° C (-4…149° F)‡  ±0.24% full scale at 25° C (77° F)	15 bits (bipolar)‡	130, 250, 290, 450, 540 ms (selectable)
1762-OF4	4 single-ended outputs (unipolar)‡	Voltage: 0…10V Current: 4…20 mA	40 mA at 5V DC 165 mA at 24V DC	±1.17% full scale at -20…65° C (-4…149° F)‡  ±0.5% full scale at 25° C (77° F)	12 bits (unipolar)	2.5 ms
1762-IF2OF2	2 differential inputs (unipolar) 2 single-ended outputs (unipolar)	Voltage: 0…10V Current: 4…20 mA	40 mA at 5V DC 105 mA at 24V DC	±0.55% full scale at -20…65° C (-4…149° F)‡  ±0.3% full scale at 25° C (77° F)	12 bits (unipolar)	2.5 ms (inputs) 4.5 ms (outputs)
Includes offset, gain, non-linearity, and repeatability error terms.  Only applicable for series B.