No comment |
>
Control System >
PLC >
AB PLC >
1756-DNB Allen-Bradley PLC DeviceNet Bridge/Scanner Module New1756-DNB Allen-Bradley PLC DeviceNet Bridge/Scanner Module NewIf you need more than 10pcs and want to get better wholesale price, please feel free to contact us by following:
email:[email protected]
Tel:0086-574-88333153
We will quote you our best price to you in 24hours.Fasstobuy: 1756-DNB Allen-Bradley PLC DeviceNet Bridge/Scanner Module New
Features
Separate communication modules are available for different networks. Install multiple communication modules into the ControlLogix backplane to bridge or route control and information data between different networks. You can route a message through a maximum of four chassis (eight communication hops). You do not need a ControlLogix controller in the chassis.
ControlLogix-XT communication modules for extreme environments are available for EtherNet/IP, ControlNet, and Data Highway Plus and Remote I/O networks.Specification
Attribute
1756-DNB/E
DeviceNet communication rate
125 Kbps (500 m max)
250 Kbps (250 m max)
500 Kbps (100 m max)
Number of nodes, max
64
Current draw @ 5.1V DC
400 mA
Current draw @ 24V DC
0 mA
DeviceNet current draw @ 24V DC
60 mA
DeviceNet voltage range
11...25V DC CL 2/SELV
Power dissipation
3.5 W
Thermal dissipation
11.9 BTU/hr
Isolation voltage
50V (continuous), basic insulation type, DeviceNet network to backplane
Type tested at 853V AC for 60 s
No isolation between USB and backplane
Slot width
1
Module location
Chassis-based, any slot
Chassis
1756-A4, 1756-A7, 1756-A10, 1756-A13, 1756-A17
Power supply, standard
1756-PA72/C, 1756-PA75/B, 1756-PB72/C, 1756-PB75/B, 1756-PC75/B, 1756-PH75/B
Power supply, redundant
1756-PA75R, 1756-PB75R, 1756-PSCA2
DeviceNet power
To comply with the CE low voltage directive (LVD), the DeviceNet network must be powered from a source compliant
with the safety extra low voltage (SELV) or protected extra low voltage (PELV).
To comply with UL restrictions, the DeviceNet network must be powered from a source compliant with Class 2 or
limited voltage/current.
DeviceNet port
1 DeviceNet open-style 5- or 10-pin linear plug
DeviceNet connector torque
0.56?.79 N•m (5? lb•in)
USB port(1)
USB 2.0, full speed (12 Mbps)
Wiring category(2)
1 - On DeviceNet ports
3 - On USB ports
North American temperature code
T4A
IEC temperature code
T4
Enclosure type rating
None (open-style)
No comment |