DVP-FPMC PLC Ethernet CAN open communication card module Delta New

DVP-FPMC Delta PLC Ethernet/CANopen communication card Original brand new

Introduction

1. Compliant with CANopen standard protocol DS301v4.02.

2. Supports CANopen standard protocol DS402v2.0: Max. 4 motion axes

3. Supports NMT and SDO services

4. The motion axes support profile position mode and homing mode

Specification

Type	Removable connector (5.08mm)
Transmission method	CAN
Transmission cable	2 communication cables, 1 shielded cable and 1 ground wire
Electrical isolation	500VDC

Ethernet Connector

Type	Removable connector (5.08mm)
Transmission method	Ethernet
Transmission cable	2 communication cables, 1 shielded cable and 1 ground wire
Transmission speed	10M/100M
Max cable length	100m
Electrical isolation	500VDC

Communication

Message type	PDO, SDO, SYNC (synchronous object), Emergency (emergency object), NMT
Serial transmission speed	500k, 1M bps (bits per second)
Max cable length	500k (100m), 1M (25m)
Product code	254
Equipment type	0 (Non-Profile)
Company ID	477 (Delta Electronics, Inc.)

Electrical Specification

Power supply voltage	Supplied by MPU through internal bus, 24VDC (-15% ~ 20%)
Power consumption	1.7W
Insulation voltage	500V
Weight (g)	66

Environment

Noise immunity	ESD (IEC 61131-2, IEC 61000-4-2): 8kV Air Discharge, 4kV Contact Discharge EFT (IEC 61131-2, IEC 61000-4-4): Communication I/O: 1kV RS (IEC 61131-2, IEC 61000-4-3): 80 ~ 1,000MHz , 1.4 ~ 2.0GHz , 10V/m
Operation/storage	Operation: 0ºC~ 55ºC (temperature), 50 ~ 95% (humidity), pollution degree 2 Storage: -25ºC ~ 70ºC (temperature), 5 ~ 95% (humidity)
Shock/vibration immunity	International standards: IEC 61131-2, IEC 68-2-6 (TEST Fc)/IEC 61131-2 & IEC 68-2-27 (TEST Ea)
Standards	IEC 61131-2, UL508

Product Profile