TSXCTY2A Schneider PLC NEW

If you need more than 10pcs and want to get better wholesale price, please feel free to contact us by following:
email:[email protected]
Tel:0086-574-88333153
We will quote you our best price to you in 24hours.

Schneider PLC TSXCTY2A

Product description:

Main:

Range of product Modicon Premium Automation platform

Product or component

type

Counter modules

I/O modularity 2 channels

Electrical circuit type Auxiliary output conforming to EN/IEC 61131

Complementary:

Counting frequency 40 kHz

Power dissipation in W 4.5...6 W

Module cycle time 5

Discrete input logic Current sink auxiliary input (preset, enable and read) conforming to IEC 1131

Type 2

Resistive 2/3-wire proximity sensors PNP/NPN input conforming to IEC 1131

Type 2

Resistive encoder input

Input logic Positive

Input compatibility 2/3-wire proximity sensors PNP/NPN

Incremental encoder 10...30 V totem pole

Incremental encoder 5 V DC RS422

Input voltage 24 V 18 mA 2/3-wire proximity sensors PNP/NPN

24 V 7 mA auxiliary input (preset, enable and read)

5 V 18 mA encoder input

Input voltage limits <= 5.5 V encoder input

19...30 V 2/3-wire proximity sensors PNP/NPN

19...30 V auxiliary input (preset, enable and read)

Voltage state1 guaranteed >= 11 V 2/3-wire proximity sensors PNP/NPN

>= 11 V auxiliary input (preset, enable and read)

>= 2.4 V encoder input

Current state 1 guaranteed > 3.7 mA encoder input

> 6 mA 2/3-wire proximity sensors PNP/NPN

> 6 mA auxiliary input (preset, enable and read)

Voltage state 0 guaranteed <= 1.2 V encoder input

<= 5 V 2/3-wire proximity sensors PNP/NPN

<= 5 V auxiliary input (preset, enable and read)

Current state 0 guaranteed < 1 mA encoder input

< 2 mA 2/3-wire proximity sensors PNP/NPN

< 2 mA auxiliary input (preset, enable and read)

Response time < 2.5 ms sensor voltage at loss of 24 V auxiliary input (preset, enable and read)

Input impedance > 270 Ohm at U = 2.4 V encoder input

1400 Ohm at Un 2/3-wire proximity sensors PNP/NPN

3400 Ohm at Un auxiliary input (preset, enable and read)

400 Ohm at Un encoder input

Output voltage 24 V DC

Nominal output current 0.5 A

Output voltage limits 19...30 V

Voltage drop < 0.5 V at state 1

Output compatibility Positive logic DC inputs (resistance <= 15 kOhm) auxiliary output

Leakage current < 0.1 mA

Switching time < 250 μs

Switching frequency < 0.6/LI² Hz on inductive load

Output overload protection Current limiter

Thermal tripping via program or automatically

Output short-circuit protection Current limiter

Thermal tripping via program or automatically

Output overvoltage protection Zener diode

Reverse polarity protection Reverse diode on supply

Checks Sensor power supply

Current consumption 280 mA 5 V DC

30 mA 24 V DC

Module format Standard

Local signalling 1 LED green module operating (RUN)

1 LED red external fault (I/O)

1 LED red internal fault, module failure (ERR)

2 LED green axis diagnostics available (CH.)