DTE10P Delta Temperature Controller main unit Input 24VDC 3-channel PT RS-485 New

Delta Temperature Controller main unit Input 24VDC 3-channel PT RS-485 New

Delta Temperature Controller (TC) DTE Series:

 

 Features

DTE series is a multi-channel modular temperature controller, supporting maximum 8 groups of thermocouple/platinum resistance input. The DIN rail installation saves wires, and the controller on each channel can work independently at the same time. DTE offers several output modules (relay, voltage pulse, current output and linear voltage output). The built-in 2-wire RS-485 communication is able to reach baud rate of 115,200bps. In programmable control, DTE is able to set up 64 sets of different temperature and control time. In addition, maximum 7 DTC2000 controllers are extendable to DTE, and DTE supports the synchronous communication protocol and auto ID setup function which DTC series also supports.

 Specifications

PID, ON/OFF, programmable PID or manual control are available.

PID auto-tuning

Programmable control for 8 patterns and 8 steps in each pattern

12 modes ready for alarm output

°C or °F for the temperature unit

?Built-in RS-485 communication interface which supports Modbus ASCII/RTU and baud rate of up to 115,200bps.

Extendable to maximum 7 DTC2000 digital controllers

Supports synchronous communication protocol and auto ID setup function.

Supports various selections of input/output modules, e.g. relay output, voltage pulse output, current output, analog voltage output, parameter display and setup.

Supports CT functions, over-current and off-line alarm

Applications

Airconditioning system, plastic machinery

Specifications

Power input	24 VDC, isolated switching power supply
Voltage range	90 to 110% rated voltage
Power consumption	Max. 10W + 3W × number of DTC2000 controllers connected in parallel (Max. 7)
Input sensor	Thermocouple: K, J, T, E, N, R, S, B, L, U, TXK
	Platinum resistance: Pt100, JPt100, Ni120, Cu50
Sampling cycle	Thermocouple or platinum resistance: 1.0 second/all input
Control method	PID, PID programmable, manual, ON/OFF
Output accessories (optional)	Relay output: SPST, Max. 250 VAC load, 3 A resistive load
	Voltage pulse output: 12 VDC, Max. 40 mA current output
	Current output: DC 4 to 20 mA output (resistive load < 500?); for OUT1 and OUT2 only
	Analog voltage output: 0 to 10 V (resistive load > 1,000?); for OUT1 and OUT2 only
Output functions (optional)	Control output, alarm output or proportional output (proportional output is only applicable in the model with linear voltage and current output for OUT1, OUT2)
Alarm modes (optional)	13 alarm modes available
Communication	RS-485 digital communication; supports baud rate 2,400 to 115,200 bps
Communication protocol	Supports Modbus ASCII/RTU
Extension port	The extension port transmits 24V power supply and communication signals to extension module DTC2000.
Vibration resistance	10 ~ 55Hz 10m/s 2 3 axes 10mins
Shock resistance	Max. 300m/s 2 3 axes 6 directions, 3 times each
Ambient temperature	0 to +50°C
Storage temperature	-20 to +65°C
Operation altitude	< 2,000m
Ambient humidity	35 to 85% RH (non-condensing)
Pollution degree	2