No comment |
>
Motion Control System >
Servo system >
Leadshine 2-phase Classic Analog Stepper Drive M860 DC24-80V 2.4-7.2A NewLeadshine 2-phase Classic Analog Stepper Drive M860 DC24-80V 2.4-7.2A NewPLCAGE: Leadshine 2-phase Classic Analog Stepper Drive M860 DC24-80V 2.4-7.2A New
Introductions:
The M860 is a high performance microstepping drive based on pure-sinusoidal current control technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drives on the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.
Features:
*Extremely cost-effective
*Good high speed performance
*Supply voltage up to +72VDC
*Output current up to 7.2A
*Self-adjustment technology
*Pure-sinusoidal current control technology
*Pulse input frequency up to 300 KHz
*TTL compatible and optically isolated input
*Automatic idle-current reduction
*16 selectable resolutions in decimal and binary, up to 51,200 steps/rev
*Suitable for 2-phase and 4-phase motors
*Support PUL/DIR and CW/CCW modes
*Short-voltage, over-voltage, over-current andshort-circuit protection
Specifications:
Parameters
M860
Min
Typical
Max
Unit
Output current
1.8
-
7.2 (5.1 RMS)
A
Supply voltage
+24
+68
+72
VDC
Logic signal current
7
10
16
mA
Pulse input frequency
0
-
300
kHz
Isolation resistance
500
MΩ
Applications:
Suitable for a wide range of stepping motors, from NEMA size 17 to 34. It can be used in various kinds of machines, such as X-Y tables, engraving machines, labeling machines, laser cutters, pick-place devices, and so on. Particularly adapt to the applications desired with low noise, low heating, high speed and high precision.
Other hot items of this Leadshine stepper drives for above applications:
M542
Leadshine 2-phase Classic Analog Stepper Drive M542 DC20-50V 1.0-4.2A New
M550
Leadshine 2-phase Classic Analog Stepper Drive M550 DC20-50V 1.2-5.0A New
M752
Leadshine 2-phase Classic Analog Stepper Drive M752 DC20-75V 1.8-5.2A New
M760
Leadshine 2-phase Classic Analog Stepper Drive M760 DC20-75V 1.45-6.0A New
M860
Leadshine 2-phase Classic Analog Stepper Drive M860 DC24-80V 2.4-7.2A New
M880A
Leadshine 2-phase Classic Analog Stepper Drive M880A DC24-80V 2.8-7.8A New
MA860H
Leadshine 2-phase Classic Analog Stepper Drive MA860H DC24-80V 2.4-7.2A New
No comment |