E6D-CWZ2C 1000P/R encoder

E6D-CWZ2C 1000P/R OMRON encoder

Electric incremental outer diameter φ60
  
Ensure that the rugged strength of the strongest axis
? Make sure the rugged strength of the strongest axis.
Radial 120N axial 50N strong
? IP65f the drip oil constructor
? complementary output type used, the wires can extend over long distances
? Output short circuit protection circuit and reduce inappropriate wiring risk

Ratings / Performance

Increasing the supply voltage: DC12V-10% 24V +15% pulse (pp) less than 5%
 Current consumption * 1: 100 mA max.
 Resolution (pulses / rotation): 100,200,360,500,600,1,000
 Output forms: open-collector output * 2
 Output capacity: Output voltage: VH = VCC-3V above (IO = 30mA), the VL = 2V (IO =-30mA) output current: ± 30mA
 Maximum response frequency: 83kHz
 Output phase difference: A phase difference of 90 ± 45 ° in phase B (1/4T ± 1/8T)
 Output rise, fall time: 1μs (cable length: 2m, the output current: 30mA)
 Starting torque: room temperature: 10m • N, low temperature: 15m • N the following
 Moment of inertia the following: 3 × 10-6kg • m2 (600P / R below 1.5 × 10-6kg • m2 or less)
(Axis to allow the force)

radial: 120N
Axial: 50N
 To allow maximum speed: 5,000 r / min.
 Protection circuit: reverse power polarity protection, output load short-circuit protection
 Ambient temperature range: Operating: -10 to +70 ° C, save: -25 ~ to +85 ° C (no icing)
 Ambient humidity range: Working • Save: 35 ~ 85% RH (without condensation)
 Insulation resistance: 20MΩ (500 VDC megger) charging the Ministry of the overall housing
 Withstanding Voltage: Voltage AC500V 50/60Hz 1min between charging and case
 Vibration (durable): 10 ~ 500Hz complex amplitude 2mm or 150 m/s2, X-, Y, Z each direction scan 11min 3 scan
 The impact of (durable): 1,000 m/s2 the X, Y, and Z directions for three times
 Protection structure: the IEC specification IP65 (specifications IP65f of the JEM drip oil) * 3
 Connection: Pre-wired (standard cable length: 2m)
Housing: Asia-lead alloy
Body: aluminum
Axis: SUS420J2
 Weight (packed state): about 500g
 Accessories: manual


Note:
*1 Turn the power flow through about 9A impulse flow (time, approximately 5μs)
* 2 on the right of the complementary outputs, said output circuit there are two kinds NPN and PNP2 of the output transistors. According to the output signal "H", "L"
   The two kinds of output transistors cross each other to the "ON", "OFF" action. Use, the positive supply, OV pull.
   Pull down the complementary output is the output current outflow or inflow of two kinds of action, is characterized by the rise of the signal decreased speed, long distance to extend wire.
   Into the machine with an open collector (NPN, PNP) connection.