22F-D6P0N103 Rockwell PowerFlex 4M 380V 2.2KW NEW

22F-D6P0N103 Rockwell PowerFlex 4M 380V 2.2KW NEW

If you need more than 10pcs and want to get better wholesale price, please feel free to contact us by following:
email:[email protected]
Tel:0086-574-88333153
We will quote you our best price to you in 24hours.

The High-end Inverter

Providing users with powerful motor speed control in a compact, space saving design, the Allen-Bradley®  PowerFlex® 4M AC drive is the smallest and most cost effective member of the PowerFlex®  family of drives. Ideal for machine level speed control, the PowerFlex 4M drive provides the application versatility to meet the demands ofglobal OEMs and end users who require space savings and easy-to-use AC drives that provide application flexibility, feed-through wiring and ease-of-programming. The PowerFlex 4M AC drive is available in three frame sizes (A, B and C) and power ratings from 0.2 to 11 kW (0.25 to 15 Hp) and in voltage classes of 120, 240 and 480 volts.What can you expect from Mitsubishi FR-A700?

Environmental Specifications
Category		Specification
Altitude:		1000 m (3300 ft) maximum without derating
Maximum Surrounding Air Temperature without Derating     IP20:     IP20 Zero Stacking:		-10…50 °C (14…122 °F) -10…40 °C (14…104 °F)
Cooling Method     Convection:     Fan:		120V, Single-Phase, 0.75 kW (1 HP) and below 240V, Single-Phase, 0.4 kW (0.5 HP) and below 240V, Three-Phase, 0.75 kW (1 HP) and below 480V, Three-Phase, 0.75 kW (1 HP) and below All other drive ratings.
Storage Temperature:		-40…85 °C (-40…185 °F)
Atmosphere:		Important: Drive must not be installed in an area where the ambient atmosphere contains volatile or corrosive gas, vapors or dust. If the drive is not going to be installed for a period of time, it must be stored in an area where it will not be exposed to a corrosive atmosphere.
Relative Humidity:		0 to 95% non-condensing
Shock:		15 g peak for 11 ms duration (±1.0 ms)
Vibration:		1 g peak, 5 to 2000 Hz
Technical Specifications
Category	Specification
Protection	Motor Protection:		I2t overload protection - 150% for 60 seconds, 200% for 3 seconds (provides Class 10 protection)
	Overcurrent:		200% hardware limit, 300% instantaneous fault
	AC Input Overvoltage Trip     100…120V:     200…240V:     380…460V:		150V AC 290V AC 575V AC
	AC Input Undervoltage Trip     100…120V:     200…240V:     380…460V:		75V AC 150V AC 275V AC
	Bus Overvoltage Trip     100…120V:     200…240V:     380…460V:		405V DC 405V DC 810V DC
	Bus Undervoltage Trip     100…120V:     200…240V:     380…460V:		210V DC 210V DC 390V DC
	Logic Control Ride-Thru:		Minimum is 0.5…2 seconds, typical
	Faultless Power Ride-Thru:		100 milliseconds
	Dynamic Braking:		Internal brake IGBT included with power ratings 5.5 kW (7.5 HP) and 7.5 kW (10.0 HP) for 240V, 3-phase drives and 5.5 kW (7.5 HP), 7.5 kW (10.0 HP) and 11.0 kW (15.0 HP) for 480V, three-phase drives.
	Recommended Fuses/Circuit Breakers     Fuse:     Circuit Breakers:		UL Class J, RK1, T or Type BS88; 600V (550V) or equivalent. HMCP or Bulletin 140M or equivalent.
Electrical	Efficiency:		97.5% (Typical)
	Voltage Tolerance:		200…240V, 380…480V, 460…600V: ±10%
	Input Frequency Tolerance:		48…63 Hz
	Input Phases:		Three-phase input provides full rating. Single-phase operation provides 35% rated current.
	Displacement Power Factor:		0.98 across entire speed range
	Maximum Short Circuit Rating:		100,000 Amps symmetrical
	Actual Short Circuit Rating:		Determined by AIC Rating of installed fuse/circuit breaker.
	Transistor Type:		Isolated Gate Bipolar (IGBT)
Control	Carrier Frequency:		2…10 kHz. Drive rating based on 4 kHz.
	Output Frequency:		0…400 Hz (Programmable)
	Frequency Accuracy     Digital Input:     Analog Input:		Within ±0.05% of set output frequency. Within 0.5% of maximum output frequency.
	Speed Regulation - Open Loop with Slip Compensation:		±2% of base speed across a 40:1 speed range.
	Stop Modes:		Multiple programmable stop modes including; Ramp, Coast, DC Brake, Ramp-to-Hold and S Curve.
	Accel/Decel:		Two independently programmable accel and decel times. Each time may be programmed from 0…600 seconds in 0.1 second increments.
	Intermittent Overload:		150% Overload capability for up to 1 minute 200% Overload capability for up to 3 seconds
	Electronic Motor Overload Protection:		Class 10 protection with speed sensitive response and power-down overload retention function.
Control I/O	Digital Control Inputs     Current:     SRC (Source) Mode:     SNK (Sink) Mode:		6 mA On = 18…24V, Off = 0…6V On = 0…6V, Off = 18…24V
	Analog Control Inputs     0…10V DC:     4…20 mA:     External Pot:		100k ohm input impedance 250 ohm input impedance 1…10k ohms, 2 Watt minimum
	Control Output     Resistive Rating:     Inductive Rating:		Programmable Output, Form C Relay 3.0 A at 30V DC, 125 and 240V AC 0.5 A at 30V DC, 125 and 240V AC