22B-D6P0N104 Rockwell PowerFlex 40 380V 2.2KW NEW

22B-D6P0N104 Rockwell PowerFlex 40 380V 2.2KW NEW

If you need more than 10pcs and want to get better wholesale price, please feel free to contact us by following:
email:[email protected]
Tel:0086-574-88333153
We will quote you our best price to you in 24hours.

 

The High-end Inverter

Designed to meet global OEM and end-user demands for simplicity, space savings, and cost efficiency, this drive provides intuitive features such as an integral keypad with local potentiometer and control keys that are active right out of the box.

 

Technical Specifications
Category	Specification
Protection	Motor Protection:	I2t overload protection - 150% for 60 seconds, 200% for 3 seconds (provides Class 10 protection)
	Overcurrent:	200% hardware limit, 300% instantaneous fault
	AC Input Overvoltage Trip     100…120V:     200…240V:     380…480V:	150V AC 290V AC 575V AC
	AC Input Undervoltage Trip     100…120V:     200…240V:     380…480V:	75V AC 150V AC 275V AC
	Bus Overvoltage Trip     100…120V:     200…240V:     380…480V:	405V DC 405V DC 810V DC
	Bus Undervoltage Trip     100…120V:     200…240V:     380…480V:	210V DC 210V DC 390V DC
	Logic Control Ride-Thru:	Minimum is 0.5 seconds - 2 seconds, typical
	Faultless Power Ride-Thru:	100 milliseconds
	Dynamic Braking	Internal brake IGBT included with all ratings except No Brake versions.
	Recommended Fuses/Circuit Breakers     Fuse:     Circuit Breakers:	UL Class J, CC, T or Type BS88; 600V (550V) or equivalent. HMCP circuit breaker or equivalent.
Electrical	Efficiency:	97.5% (Typical)
	Voltage Tolerance:	120V, 200…240V, 380…480V, 460…600V: ±10%
	Frequency Tolerance:	48…63 Hz
	Displacement Power Factor:	0.98 across entire speed range
	Maximum Short Circuit Rating:	100,000 Amps symmetrical
Control	Carrier Frequency:	2…16 kHz. Drive rating based on 4 kHz.
	Output Frequency:	0…240 Hz (Programmable)
	Frequency Accuracy     Digital Input:     Analog Input:	Within ±0.05% of set output frequency. Within 0.5% of maximum output frequency.
	Speed Regulation - Open Loop with Slip Compensation:	±2% of base speed across a 40:1 speed range.
	Stop Modes:	Multiple programmable stop modes including; Ramp, Coast, DC Brake, Ramp-to-Hold and S Curve.
	Accel/Decel:	Two independently programmable accel and decel times. Each time may be programmed from 0…600 seconds in 0.1 second increments.
	Intermittent Overload:	150% Overload capability for up to 1 minute 200% Overload capability for up to 3 seconds
	Electronic Motor Overload Protection:	Class 10 protection with speed sensitive response.
Control I/O	Digital Control Inputs     Current:     SRC (Source) Mode:     SNK (Sink) Mode:	6 mA On = 18…24V, Off = 0…6V On = 0…6V, Off = 18…24V
	Analog Control Inputs     0…10V DC:     4…20 mA:     External Pot:	100k ohm input impedance 250 ohm input impedance 1…10k ohms, 2 Watt minimum
	Control Output     Resistive Rating:     Inductive Rating:	Programmable Output, Form C Relay 3.0 A at 30V DC, 125 and 240V AC 0.5 A at 30V DC, 125 and 240V AC