SV004iG5-1 LS AC Drive Inverter Starvert Series iG5 Single Phase 0.5HP 0.37KW 370W 200~230V New free shipping

SV004iG5-1 LS Electrogenesis converter iG5 series NEW

If you need more than 10pcs and want to get better wholesale price, please feel free to contact us by following:
email:[email protected]
Tel:0086-574-88333153
We will quote you our best price to you in 24hours.

Features:

Selectable V/f, sensorless vector control

Motor parameter Auto-tuning

Powerful torque at overall speed range

0.1 ~ 400Hz frequency output

-15% ~ +10% input voltage margin

Fault history: Last 5 faults

0~10Vdc / -10 ~ +10Vdc analog input

IP20 enclosure, UL Type 1 (Option)

Selectable manual/automatic torque boost

Selectable PNP/NPN input signal

2nd motor control and parameter setting

Built-in Dynamic braking transistor as standard

Enhanced process PID control

Built-in RS485 (LS Bus / Modbus RTU) communication

Cooling fan On/Off control & Easy change

Remote control using external keypad * RJ45 cable(Optional)

Upgraded functions:

Sleep & Wake-up (Energy savings)

KEB(Kinetic Energy Buffering) protection

Low leakage PWM algorism

Monitoring & commissioning PC based software tool (Drive View)

Specifications:

1 Phase 200V

SV***iG5A-1***		004	008	015
Max. capacity 1)	(HP)	0.5	1.9	2
	(kW)	0.4	0.75	1.5
Output rating	Capacity (kVA) 2)	0.95	1.9	3.0
	FLA (A) 3)	2.5	5	8
	Max frequency	400 [Hz] 4)
	Max voltage	3 phase 200~230V 5)
Input rating	Rated voltage	1 phase 200~230 VAC (+10%, -15%)
	Rated frequency	50~60 [Hz] (±5%)
Cooling method		Forced air cooling
Weight (kg)		0.76	1.12	1.84

Indicate the maximum applicable motor capacity when using 4 pole LS standard motor.

Rated capacity is based on 220V for 200V series and 440V for 400V series.

Refer to 15-3 of user’s manual when carrier frequency setting (39) is above 3kHz.

Max. frequency setting range is extended to 300Hz when H40 (Control mode select) is set to 3 (Sensorless vector control).

Max. output voltage cannot be higher than the input voltage. It can be programmable below input voltage.

 

Control	Control method		V/F, Sensorless vector control
	Frequency setting resolution		Digital command: 0.01Hz Analog command: 0.06Hz (Max. freq.: 60Hz)
	Frequency accuracy		Digital command: 0.01% of Max. output frequency Analog command: 0.1% of Max. output frequency
	V/F pattern		Linear, Squared, User V/F
	Overload capacity		150% per 1 min.
	Torque boost		Manual/Auto torque boost
	Dynamic braking	Max. braking torque	20% 1)
		Max. Duty	150% when using optional DB resistor 2)
Operation	Operation mode		Keypad/ Terminal/ Communication option/ Remote keypad selectable
	Frequency setting resolution		Analog: 0~10V, -10~10V, 0~20mA Digital: Keypad
	Operation features		PID, Up-down, 3-wire
	Input	Multi-function terminal P1-P8	NPN/PNP selectable
			FWD/REV RUN, Emergency stop, Fault reset, Jog operation, Multi-step Frequency-High, Mid, Low, Multi-step Accel/Decel-High, Mid, Low, DC braking at stop, 2nd motor select, Frequency UP/Down, 3-wire operation, External trip A, B, PID-Inverter (V/F) operation bypass, Option-inverter (V/F) operation bypass, Analog Hold, Accel/Decel stop
	Output	Open collector terminal	Fault output and inverter status output	Less than DC 24V, 50mA
		Multi-function relay		(N.O., N.C.) Less than AC 250V, 1A; Less than DC 30V, 1A
		Analog output (AM)	0~10Vdc (less than 10mA): Output freq, Output current, Output voltage, DC link selectable
Protective function	Trip		Over voltage, Under voltage, Over current, Ground fault current detection, Inverter overheat, Motor overheat, Output phase open, Overload protection, Communication error, Loss of speed command, Hardware fault, Fan trip
	Alarm		Stall prevention, Overload
	Momentary power loss		Below 15 msec.: Continuous operation (Should be within rated input voltage, rated output power.) Above 15 msec.: Auto restart enable
Environ ment	Protection degree		IP 20, NEMA1 (Optional)
	Ambient temp		-10?~50?
	Storage temp		-20?~65?
	Humidity		Below 90% RH (No condensation)
	Altitude/Vibration		Below 1,000m, 5.9m/sec2 (0.6G)
	Atmospheric pressure		70~106 kPa
	Location		Protected from corrosive gas, Combustible gas, Oil mist or dust

Means average braking torque during Decel to stop of a motor.

Refer to Chapter 16 of user’s manual for DB resistor specification.