VLT2882 DANFOSS Inverter 380V18.5kw Advanced General Purpose

VLT2882 DANFOSS Inverter 380V18.5kw Advanced General Purpose

Power range
0.55 - 18.5 kW (3 phase 380 -480 V ± 10%; 50/60 Hz)
0.37 -1.5 kW (single phase and three phase are available, 200 - 240 V ± 10%; 50/60 Hz)
2.2 -3.7 kW (3 phase 200 - 240 V ± 10%; 50/60 Hz)
Variable output frequency range of between 0 and 1000 Hz

Product safety
100% short circuit proof function
100% ground-fault protection
The main power transient protection
Input switching output switches
High and low voltage insulation
Designed in accordance with EN 50178 standard

Speed compensation precise stop
Better process control
Regardless of the initial motor speed, stopping distance is the same

Exact stop
Stopped by the interrupt control
Process more repeatable
Clearly defined stop

Technical parking
Accurate positioning
High-frequency input (65 kHz)
24 V incremental encoder input
AB encoder input (optional)

Automatic motor tuning
Perfect matching of the motor and inverter
Measure the stator resistance (RS)
Better performance of the spindle
In the measurement process without having to exert torque
Check the motor phase missing

At 45 ° C without derating
VLT ® 2800 in the ambient temperature of 45 ° was still able to work properly, without derating, and can be up to 40 ° C
A state of continuous work.

Flexible installation
Horizontal mounting
Vertical installation
True side-by-side installation
Does not occur derating
The same is true of the various modules
A thermostatically controlled fan

Cooling plate technology
Reduce the heat in the cabinet
More intensive installation
Cabinet seal better
Protection capability:
- Dust
- Anti-fouling
- Moisture
Heat is shed from the back of the inverter

Communication
DeviceNet
ModBus RTU
Metasys N2
Profibus DP option

EMC filter and DC coils
Compliance with EMC standards.
Built-in EN 55011 1A filter, with 25 meters of shielded cable.
EMC interference.
EN 55011 1B filter available as module.
IT mains compatible version with RFI filter (maximum power of 4 kW).
The VLT 2880-2882 (with the switching of RF interference).

Braking function
DC braking - about 20% braking torque
AC brake - about 20% braking torque
Dynamic brake
- Built-in brake chopper
- 160% braking torque
The LCP2 alphanumeric display, copy
MCT10 software