2ph 130mm NEMA54 28NM 7.5A 2500line Encoder closed loop Stepper Motor+Drive Kit Engraving Cutting machine

130J18205EC-2500+2HSS2208H

Main application fields

Advertising industry, Engraving, packaging, lasers, electron industry, medical industry, Printing industry, woodworking, machinery industry, Ceramic Industry, stone industry and so on.

Brief introduction

2HSS two phase hybrid stepper servo drive system integrated servo control technology into the digital step driver. It adopts typical tricyclic control method which include current loop,speed loop and position loop.This product has the advantage of both step and servo system, is a highly cost-effective motion control products.

characteristic  

1.      Full closed loop control, motor encoder with 2500 line, close to 100% of the torque output2.      Segment set range is 2-256, fast response, high speed, light isolation fault alarm output interface ALM3.      Current loop bandwidth (-3 db) 2 KHZ (typical), speed loop bandwidth 500 hz (typical), the position loop bandwidth 200 hz (typical)4.      RS232 serial port communication available to download or change parameters; Over-current, over-voltage, undervoltage, overheating, speeding, differential protection; Alarm clear input ENA

 Drive specification

Model	Current	Voltage	Matched motor	Weight	Dimension	Control signal
2HSS57	0-6A	DC(24-48V)	57.86mm	0.27kg	118*75.5*34	Differential
2HSS86	0-6A	DC(24-80V)	57.86mm	0.57kg	150*97.5*53	Differential
2HSS86H	0-7A	DC(40-110V)	57.86.110mm	0.60kg	150*97.5*53	Differential
		AC(60-80V)
2HSS1108H	0-8A	AC(80-220V)	86.110mm	1.50kg	181*140*70	Differential
2HSS2208H	0-8A	AC(110-240V)	110.130mm	1.50kg	181*140*70	Differential

Motor specification

model	Step Angle	Holding Torque	Current/ Phase	Resis Tance/ Phase	Inductance/Phase	Detent Torque	Rotor Inetria
57J1854EC-1000	1.8	0.9NM	2.8A	0.4 ohms	1.2 mh	400gcm	280
57J1880EC-1000	1.8	2.2NM	4A	0.35 ohms	1.8 mh	700 gcm	480
86J1880EC-1000	1.8	4.5NM	4A	0.4 ohms	3.5 mh	1300 gcm	1400
86J1895EC-1000	1.8	7NM	5A	0.37 ohms	3.3 mh	2000 gcm	1850
86J18118EC-1000	1.8	8.5NM	5A	0.44 ohms	4.4 mh	2500 gcm	2700
86J18156EC-1000	1.8	12NM	6A	0.72 ohms	5.5 mh	4000 gcm	4000
110J18135EC-1000	1.8	12NM	6A	0.78 ohms	12.7 mh	3000 gcm	10000
110J18160EC-1000	1.8	18NM	6.5A	0.87 ohms	15.5 mh	6000 gcm	12350
110J18190EC-1000	1.8	20NM	6.8A	0.97ohms	17.5 mh	7500 gcm	13800
130J18205EC-2500	1.8	28NM	7.5A	1.1ohms	12mh	24000 gcm	33500