2PH 86mm NEMA34 3A 4.5NM 643ozin 77-123VAC Stepper motor Drive kits 2S86Q-05180+2M1180N

2PH 86mm NEMA34 3A 4.5NM 643ozin 77-123VAC Stepper motor Drive kits  2S86Q-05180+2M1180N

2S86Q-05180+2M1180N

Hybrid Servo Motor 2S86Q-05180

Specifications

Model	2S86Q-05180
Step Angle	1.8centigrade degree±5%
Phase Current (A)	3
Holding Torque (Nm)	4.5
Damping Torque (Nm)	0.12
Winding Resistance (ohm)	17±10%
Winding Inductance(mH)	16±20%
Motor Inertia (Kg.com²)	1.4
Motor Length L(mm)	80
Number of Lead Wires	4
Insulation Class	B
Withstand Voltage Level	500VAC,One Minute
Max.Axial Load (N)	60
Max.Readial Load (N)	220
Operating Temperature	-20centigrade degree~50centigrade degree
Surface Temperature Rise	Max.80centigrade degree (Rated Rhase Current after Two Phases are Connected)
Insulation Impedance	Minimum 100Mohm,500VDC
Weight (Kg)	2.3

Hybrid Servo Drive 2M1180N

Features: High-Performance, Low Prices;

The Input Voltage of 2M1180N is 77VAC~123VAC (Single-Phase);

Automatic Parameter Adjustable Regulation;

Phase Memory Technology: Remember the Phase Position of the Motor When the Motor Stopped, when Re-Power the Driver, the Motor Won’t Shake Anymore;

PLS+DIR and CW/CCW Control Signal Available;

Supply Optocoupler Isolated ERR Output Signal;

Automatic Semi-Current Locking, Reduce the Motor’s Heat Drastically;

Optocoupler Isolated Signal Input Circuit. The Maximum Frequency of Control Signal is Up to 400k Hz;

12 Micro-Step Value, the Maximum Micro-Step Value is 128;

With the Protection Function of Overvoltage, Undervoltage, Short Circuit and Heat Protection.

Specification

Model					2M1180N
Parameter Lable
Parameter					Value
Input Voltage					Single Phase 77VAC~123VAC,(50Hz)
Output Current					4.5A,5A,5.5A,6A,6.5A,7A,7.5A,8A
Micro Step					2/4/5/8/10/16/20/32/50/64/100/128
Input Signal					PLS/DIR/FRE Current Limit: 6~16 mA
Control Signal Mode					PLS + DIR, CW/CCW
Output Signal					Prot: ERR( Maximum Output Current: 10mA )
Protection					Overvoltage, Under Voltage, Short Circuit and Heat Protection.
Brake Mode *					Available to Connect the Power Resister. Need Custom.
Environment Parameter
Cooling Way					Fan
Environment		Operation Environment			Avoid the Environment with Great Amount of Metallic Powder, Oil Mist, or Erosive Gases.
		Operation Humidity			<85%, RH
		Operation Temperature			0centigrade degree~+40centigrade degree
		Storage Temperature			-20centigrade degree~+70centigrade degree
Weight					1.5Kg
Dimensions					210mm×147mm×66mm
Protect Level					IP20
Function of Rotary Switch
S1,Micro-step:
S1	0		1	2		3	4	5	6	7
Micro Step	2		4	5		8	10	16	20	32
Pulse/rev	400		800	1000		1600	2000	3200	4000	6400
S1	8		9	A		B	C	D	E	F
Micro Step	50		64	100		128	NA	NA	TEST	NA
Pulse/rev	10000		12800	20000		25600
S2,Current:
Mode	PLS+DIR
S2	0		1	2		3	4	5	6	7
Rms(A)	3.18		3.54	3.89		4.24	4.6	4.95	5.3	5.65
Peak(A)	4.5		5	5.5		6	6.5	7	7.5	8
Mode	CW/CCW
S2	8		9	A		B	C	D	E	F
Rms(A)	5.65		5.3	4.95		4.6	4.24	3.89	3.54	3.18
Peak(A)	8		7.5	7		6.5	6	5.5	5	4.5