Leadshine 2-phase Stepper Set (Drive + Motor) M542-05 + 86HS85 8.5N.m New

Leadshine 2-phase Stepper Set (Drive + Motor) M542-05 + 86HS85 8.5N.m New

PLCAGE: Leadshine 2-phase Stepper Set (Drive + Motor) M542-05 + 86HS85 8.5N.m New

M542-05

Features:

*Heatsink integrated and connectors included

*Input: 20-50 VDC

*Output: 1.0 - 4.2A

*Microstepping options: 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128; or 1/5, 1/10, 1/20, 1/25, 1/40, 1/50, 1/100, 1/125

*DIP switch current options: 1.20A, 1.75A, 2.29A, 2.84A, 3.41A, 3.97A, 4.51A, 5.04A

*Low motor heating because of the implementation of 3-state current control technology

*Support: PULSE/DIRECTION & CW/CCW modes

*Self-adjustment technology

*Pulse input frequency up to 300 KHz

*TTL compatible and optically isolated input

*Automatic idle-current reduction

*15 selectable resolutions, up to 25,600 steps/rev

*Suitable for 2-phase and 4-phase motors

*Short-voltage, over-voltage, over-current and over temperature protection

*Dimensions: 4.65 X 2.97 X 1.30 inches; 10 oz

*CE, ROHS certified

Specifications:

Model:	M542-05
Phase:	2
Control Mode:	Step & Dir, or CW/CCW
Max Input Frequency:	300Khz
Input Voltage Range:	20 - 50 VDC
Suggested Power Supply Voltage Range:	24-48 VDC
Output Current:	1.20 - 5.04 A
# of DIP Switch Resolution Configurations:	15
DIP Switch Resolution Setings:	400, 800, 1600, 3200, 6400, 12800, 25600, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 25000
# of DIP Switch Current Configurations:	8
DIP Switch Current Configurations:	1.20A, 1.75A, 2.29A, 2.84A, 3.41A, 3.97A, 4.51A, 5.04A
Logic Current Range:	7-16mA      (10mA typical)
Logic Voltage Range:	4-5 VDC for pulse active high (default) , or 0-0.5V for pulse active low
Pulse enabled at:	Rising edge
# of Digital Inputs:	3
Step Width:	1,500 ns
Minimal Direction Setup Time:	5,000 ns
Isolation Resistance:	500M Ohm
Environment:	Avoid dust, oil fog and corrosive gases
Ambient Temporature:	0-50°C
Humidity:	40–95% RH
Operating Temporature:	0-70°C
Vibration:	5.9 m/s2 Max
Storage Temporature:	-20-65°C
Specification:	4.65 X 2.97 X 1.30 Inches
Weight:	0.63 lb

Applications:

Suitable for a wide range of stepping motors, from NEMA size 17 to 34. It can be used in various kinds of machines, such as X-Y tables, engraving machines, labeling machines, laser cutters, pick-place devices, and so on. Particularly adapt to the applications desired with low noise, low heating, high speed and high precision.

86HS85 

Features:

*2-phase hybrid step motor

*High torque design

*Standard NEMA 34 dimensions

*Series or parallel and unipolar wiring

*Optimized for microstepping

Specifications:

General

Step Angle	1.8°
Step Angle Accuracy	+5%(full step, no load)
Temperature Rise	80°CMax
Ambient Temperature	-10°C -- +50°C
Insulation Resistance	100MΩmin.500VDC
Dielectric Strength	500VAC for one minute
Shaft Radial Play	0.06 Max.(450g-load)
Shaft Axial Play	0.08 max.(450g-load)
Number of Leads	8

Electric

Model Number

Connection

Holding Torque Oz-in (Nm)

Phase Current (Amps)

Phase Resistance (Ohm)

Phase Inductance (mH)

Rotor Inertia Oz-in-sec2 (g*cm2)

86HS85	Bipolar (Parallel)	1203.6(8.5)	6.0	0.45±10%	6±20%	0.03834(2700)
	Bipolar (Series)	1203.6(8.5)	3.0	1.8±10%	24±20%
	Unipolar	849.6(6.0)	4.2	0.9±10%	6±20%

Matching drives:

Model	Match drives
86HS35	EM705/EM806/DM870/DM1182
86HS45
86HS85	EM705/EM806/DM870/DM1182/ DM2282

Applications:

Suitable for all kinds of small automation equipment and instruments, such as: pneumatic marking machine, marking machine, cutting machine, laser marking machine, plotter, small engraving machine, CNC machine tools, handling equipment, etc. The efficiency is very high for the users who expect low vibration, little noise, high precision and high speed small equipments.