3M2280N Kinco Stepper Drive 3ph 8A 220VAC New

3M2280N Kinco Stepper Drive 3ph 8A 220VAC New

 Stepper Driver: 3M2280N

Features:

Input Voltage:Single-Phase 220V AC +/-15% (50Hz)(187VAC~253VAC)
Output Current(Peak,Unit:A):2.8-8.0
Input Current:6~16mA 
Micro Step:400~20,000 

High Performance, Low Cost, and Diversified Functions

The Input Voltage of 3M2280N is 187V~253V.

Automatic Parameter Adjustable Regulation

Driver Test Running Function

Phase Memory Function

PLS+DIR and CW/CCW Control Signal Available.

Optocoupler Isolation I/O. There is an ERR Signal Output.

The Driver will Reduce the Phase Current of the Motor by a Half in 1.5 Seconds.

Opto-Isolation Signal Input, With Pulse Response Frequency up to 400 KHz

14 Micro-Step Value, the Maximum Micro-Step Value is 20000 Pulse/Rev.The Maximum Output Phase Current is 8A(Peak).

With the Protection Function of Over-Voltage, Under-Voltage, Over-Current, Overheat

With Step Smooth Filter,Can Smooth the Input Pulse,Reduce the Transient Motion of Motor,Make the Motor Runs More Smoothly.

Specification

Model					3M2280N
Parameter Lable
Input Voltage					3M2280N: Single-Phase 220V AC +/-15% (50Hz)(187VAC~253VAC)
Output Current					2.8, 3.2, 3.6, 4.0, 4.4, 4.8, 5.2, 5.6, 6, 6.4, 6.8, 7.2, 7.6 8.0
Micro Step					400, 500, 600, 800, 1000, 1200, 1500, 2000, 3000, 4000, 5000, 6000, 10000, 20000
Input Signal					Three Control Signal Ports: PLS(CW)/DIR(CCW)/FRE; Current Range: 6 ~16 mA
Control Signal Input Method					PLS+DIR; CW/CCW
Output Signal					ERR, Open Collector Output, Max Current: 10 mA.
Automatic Half-Current					The Driver Will Reduce the Phase Current of the Motor by a Half in 1.5 Seconds.
Protection					Over-Voltage, Under-Voltage, Short Circuit, and Overheat Protection
Absorbing Circuit*					Need Customize, Used to Absorb the Energy Feed Back by the Motor
Environment Parameter
Cooling Way					Forced Air Cooling
Environment		Operation Environment			Avoid the Environment with Great Amount of Metallic Powder, Oil mist, or Erosive Gases.
		Operation Humidity			<85%, RH (Non-Condensing or Water Drops)
		Operation Temperature			0centigrade degree ~ +40centigrade degree
		Storage Temperature			-20centigrade degree ~ +70centigrade degree
Weight					1.5Kg
Dimensions					201mm×147mm×66mm
Protect Level					IP20
Function of Rotary Switch
S1,Micro-Step:
S1	0		1	2		3	4	5	6	7
Pulse/rev	400		500	600		800	1000	1200	1500	2000
S1	8		9	A		B	C	D	E	F
Pulse/rev	3000		4000	5000		6000	10000	20000	SET1	SET2
S2,Current:
Mode	PLS+DIR
S2	0		1	2		3	4	5	6	7
Peak(A)	2.8		3.2	3.6		4	4.4	4.8	5.2	5.6
Rms(A)	1.98		2.26	2.55		2.83	3.11	3.39	3.68	3.96
Mode	CW/CCW
S2	8		9	A		B	C	D	E	F
Peak(A)	6		6.4	6.8		7.2	7.6	8	M1	M2
Rms(A)	4.24		4.53	4.81		5.09	5.37	5.66