Ratio 1:10 NEMA17 1.3A 0.4NM 57oz-in L 40mm Gear Reduction Motor+Drive 3D Printer

 Ratio 1:10 NEMA17 1.3A 0.4NM 57oz-in L 40mm Gear Reduction Motor+Drive 3D Printer 42HS4013A4-G10+M420B

Appliaction:

Marking machine, labeling machine, cutting machine, plotter, small engraving machine, NC machine tools, transmission mechanism, medical apparatus and instruments, etc. For the vibration of the motor itself, the output torque of noise and its accuracy and high speed have been improved obviously.

Product Description

Step Angle Accuracy: ±5%(full step, no load) 

Resistance Accuracy: ±10%

Inductance Accuracy: ±20%

Temperature Rise: 80 Degrees Celsius Max.(rated current,2 phase on)
Ambient Temperature: -20°C-+50°C

Insulation Resistance: 100MΩ Min.500V DC

Dielectric Strength: 500V AC for one minute

Gear Reduction Motor Specifications

Model	42HS4013A4-G10	42HS4013A4-G18	42HS4013A4-G50
Step Angle	1.8	1.8	1.8
Rated Current (A)	1.3	1.3	1.3
Phase Resistance(ohm)	2.5	2.5	2.5
Phase Inductance(mH)	5	5	5
Holding Torque(N*cm)	40	40	40
Detent Torque(N*cm)	2.2	2.2	2.2
Rotor Inertia(g*cm2)	54	54	54
Motor Length (mm)	40	40	40
Motor Wire (No.)	4	4	4
Gear Ratio	10	18	50

Drive Specifications

Item	Min	Typical	Max	Unit
Power supply	18	24	40	V
Average output current	0.25	1	2	A
Logic input current	6	15	30	mA
Impulse response frequency	-	-	100	KHZ
Pulse low level	5	-	1	μS