Ratio1:10 NEMA23 3A 1.8Nm 257oz-in L 76mm Gear Reduction Motor+Drive Marking Machine

 Ratio1:10 NEMA23 3A 1.8Nm 257oz-in L 76mm Gear Reduction Motor+Drive Marking Machine 57HS7630A4-G10+MB450A

Appliaction:

Marking machine, labeling machine, cutting machine, plotter, small engraving machine, NC machine tools, transmission mechanism, medical apparatus and instruments, etc. For the vibration of the motor itself, the output torque of noise and its accuracy and high speed have been improved obviously.

Product Description

Step Angle Accuracy: ±5%(full step, no load) 

Resistance Accuracy: ±10% 

Inductance Accuracy: ±20%

Temperature Rise: 80 Degrees Celsius Max.(rated current,2 phase on)
Ambient Temperature: -20°C-+50°C

Insulation Resistance: 100MΩ Min.500V DC

Dielectric Strength: 500V AC for one minute

There are multiple choice for 57BYG series geared motor. if you any other choice, please do contact us for a better solution.

Motor Length: 41mm  56mm   76mm  112mm

Gear Ratio: 1:3   1:5    1:10    1:20   1:50  1:100

Reduction box: 60*60*41.5mm

Gear Reduction Motor Specifications

Model	Step Angle	Rated Current (A)	Phase Resistance (ohm)	Phase Inductance (mH)	Holding Torque (N*m)	Detent Torque (N*cm)	Rotor Inertia (g*cm2)	Motor Length  (mm)
57HS4120A4	1.8	2	1.2	2.5	0.55	2.5	150	41
57HS5630A4	1.8	3	0.8	2.4	1.1	3.5	280	56
57HS7630A4	1.8	3	1	3.5	1.8	6	440	76
57HS11242A4	1.8	4.2	1.4	1.8	3	12	800	112

 

Stepper Drive Specifications

Item	Min	Typical	Max	Unit
Power supply	24	36	50	V
Average output current	1.1	2.5	4.2	A
Logic input current	6	15	30	mA
Impulse response frequency	-	-	100	KHZ
Pulse low level	5	-	1	μS