Delta AC Servo Motor Drive kit 220V 400W 1.27NM 3000r/min 60mm ASD-A2-0421-U+ECMA-C10604RS

Delta AC Servo Motor Drive kit 220V 400W 1.27NM 3000r/min 60mm ASD-A2-0421-U+ECMA-C10604RS

Motor+Drive: ECMA-C10604RS+ASD-A2-0421-U

Package Content:
1* 400W AC servo Motor
1* 400W  AC Servo  Drive
1* 3M Encoder Cable &Power Cable 

1 Motor Specifications

Model	ECMA-C10604RS
Product Name	Electronic Commutation Motor
Servo Type	AC Servo
Rated Voltage	220V
Encoder Type	Incremental type, 20-bit
Motor Frame Size	60 mm
Type of Shaft Diameter and Oil Seal	Keyway (with fixed screw holes), w/o brake, with oil seal
Standard Shaft Diameter	S=14m
Rated Power Output	400W
Rated torque (N-m)	1.27
Max. torque (N-m)	3.82
Rated Speed	3000 rpm
Max. speed	5000 rpm
Rated current (A)	2.6 A
Max. instantaneous current (A)	7.8 A
Power rating (kW/s)	57.6
Rotor inertia (× 10-4kg.m2)	0.277
Mechanical constant (ms)	0.53
Torque constant-KT (N-m/A)	0.49
Voltage constant-KE (mV/(r/min))	17.4
Armature resistance (Ohm)	1.55
Armature inductance (mH)	6.71
Electric constant (ms)	4.30
Insulation class	Class A (UL), Class B (CE)
Insulation resistance	> 100 M ohm , DC 500 V
Insulation strength	1.8k Vac, 1 sec
Weight (kg) (without brake)	1.6Kg
Radial max. loading (N)	196
Axial max. loading (N)	68
Power rating (kW/s) (with brake)	53.8
Rotor inertia (× 10-4kg.m2) (with brake)	0.30
Mechanical constant (ms) (with brake)	0.57
Vibration grade (μm)	15
Operating temperature	0~40 degree centigrade
Storage temperature	-10~80 degree centigrade
Operating humidity	20~90% RH Non-condensate
Storage humidity	20~90% RH Non-condensate
Vibration capacity	2.5G
IP Rating	IP65
Approvals	CE UL

2 Drive Specifications

Model			ASD-A2-0421-U
Product Name			AC SERVO Drive
Series			A2
Model Type			PR mode E-CAM  I/o extender Full-Closed Control
Rated Power			400W
Power	Phase / Voltage		Single-phase 220 VAC
	Permissible Voltage		Single-phase 200 ~ 230 VAC, -15% ~ 10%
	Continuous Output Current		2.6 Arms
Cooling method			Natural cooling
Encoder Resolution  (Servo Drive Resolution)			Incremental type: 20-bit (1280000 p/rev) ; Absolute type: 17-bit (1280000 p/rev)
Main Circuit Control			SVPWM (Space Vector Pulse Width Modulation) Control
Control Mode			Auto / Manual
Dynamic Brake			None
Position Control Mode	Max. Input Pulse Frequency		Max. 500Kpps / 4Mpps (Line driver), Max. 200Kpps (Open collector)
	Pulse Type		Pulse + Direction, A phase + B phase, CCW pulse + CW pulse
	Command Source		External pulse / Register
	Smoothing Strategy		Low-pass and P-curve filter
	E-gear ratio		E-gear ratio N/M multiple N: 1~32767, M: 1:32767 (1/50 < N/M < 25600)
	Torque Limit		Parameter settings
	Feed Forward Compensation		Parameters settings
Speed Control Mode	Analog Command Input	Voltage Range	0 ~ ±10 VDC
		Input Resistance	10 KΩ
		Time Constant	2.2 us
	Speed Control Range*1		1 : 5000
	Command Source		External analog command / Register
	Smoothing Strategy		Low-pass and S-curve filter
	Torque Limit		Via parameter setting or analog input
	Bandwidth		Maximum 1 kHz
	Speed Accuracy*2		0.01% or less at 0 to 100% load fluctuation
			0.01% or less at ±10% power fluctuation
			0.01% or less at 0 to 50 degree centigrade ambient temperature fluctuation
Torque Control Mode	Analog Command Input	Voltage Range	0 ~ ±10 VDC
		Input Resistance	10 KΩ
		Time Constant	2.2 us
	Command Source		External analog command / Register
	Smoothing Strategy		Low-pass filter
	Speed Limit		Via parameter setting or analog input
Analog Monitor Output			Monitor signal can set by parameters (Output voltage range: ±8 V)
Communication Interface			RS-232 / RS-485 / USB