No comment |
>
Motion Control System >
AC Servo System >
Delta >
ASD-B0421-A Detla AC Sevor Drive 1ph 220V 400W NewASD-B0421-A Detla AC Sevor Drive 1ph 220V 400W New
Drive Specifications
Model
ASD-B0421-A
Product Name
AC SERVO Drive
Corresponding Servo Motor
ECMA-C30604( )S (S=14mm)
ECMA-C30804 ( )7 (7=14mm)
ECMA-E31305( )S (S=22mm)
ECMA-G31303( )S (S=22mm)
Series
ASD-B
Rated Power
400W
Power
Supply
Voltage / Frequency
Three-phase or Single-phase 220VAC
Permissible Voltage Range
Three-phase or Single-phase 200 ~ 230VAC, -15% ~ 10%
Permissible Frequency Range
50/60Hz ±5%
Cooling method
Natural Air Circulation
Encoder Resolution /Feedback Resolution
2500ppr/10000ppr
Main Circuit Control
SVPWM (Space Vector Pulse Width Modulation) Control
Tuning Modes
Auto/Manual
Regenerative Resistor
None
Position
Control
Mode
Max. Input Pulse
Frequency
Max. 500KPPS (Line driver) /
Max. 200KPPS (Open collector)
Pulse Type
Pulse + Direction, A phase + B phase, CCW pulse + CW pulse
Command Source
External pulse train
Smoothing Strategy
Low-pass smoothing filter
Electronic Gear
Electronic gear N/M multiple
N: 1~32767, M: 1:32767(1/50
Torque Limit Operation
Set by parameters
Feed Forward Compensation
Set by parameters
Speed
Control
Mode
Analog
Input
Command
Voltage
Range
0 ~ ±10 VDC
Input
Resistance
10 KΩ
Time
Constant
2.2 us
Speed Control Range*1
1 : 5000
Command Source
External analog signal /Internal parameters
Smoothing Strategy
Low-pass and S-curve filter
Torque Limit Operation
Set by parameters
Frequency Response
Characteristic
Maximum 250Hz
Speed Fluctuation Rate *2(at rated speed)
0.01% or less at load fluctuation 0 to 100%
0.01% or less at power fluctuation ±10%
0.01% or less at 0 to 50 degree centigrade ambient temperature fluctuation
Torque
Control
Mode
Analog
Command
Input
Voltage
Range
0 ~ ±10 VDC
Input
Resistance
10 KΩ
Time
Constant
2.2 us
Command Source
External analog signal / Internal parameters
Smoothing Strategy
Low-pass smoothing filter
Speed Limit Operation
Set by parameters
Communication Interface
RS-232 / RS-485
No comment |