ASD-M-0721-M Detla AC Sevor Drive 1ph 220V 750W 5.1A Full-closed Loop CANopen New

ASD-M-0721-M Detla AC Sevor Drive 1ph 220V 750W 5.1A Full-closed Loop CANopen New

AC Servo Drive ASD-M-0721-M available, if need other choices, contact us directly, we can also supply ASD-M-0721-F.

Drive Specifications

Model				ASD-M-0721-M
Product Name				AC SERVO Drive
Corresponding Servo Motor				ECMA-C*0401*S (S=8mm) ECMA-C*0602*S (S=14mm) ECMA-C*0604* S (S=14mm) ECMA-C*0804*7 (7=14mm)   ECMA-C*0807*S (S=19mm) ECMA-C*0907*S (S=16mm) ECMA-E*1305*S (S=22mm) ECMA-G*1303*S (S=22mm) ECMA-G*1306*S (S=22mm)
Series				ASD-M
Rated Power				750W
Model Type				Full-Closed Loop  CANopen
Power	Phase / Voltage			Single-phase 220 VAC
	Permissible Voltage			Single-phase  200 ~ 230 VAC, -15% ~ 10%
	Continuous Output Current			5.1 Arms
Cooling method				Fan  cooling
Encoder Resolution  (Servo Drive Resolution)				20-bit (1280000 p/rev)
Main Circuit Control				SVPWM (Space Vector Pulse Width Modulation) Control
Control Mode				Auto / Manual
Dynamic Brake				Built-in
Position Control Mode		Max. Input Pulse Frequency		Transmitted by differential: 500K/4Mpps, transmitted by open-collector: 200Kpps
		Pulse Type		Pulse + symbol; A phase + B phase; CCW pulse + CW pulse
		Command Source		External pulse / Register
		Smoothing Strategy		Low-pass and P-curve filter
		E-gear ratio		E-gear ratio: N/M time, limitation: (1/50 < N/M < 25600)  N: 1~32767/M: 1:32767
		Torque Limit		Parameter settings
		Feed Forward Compensation		Parameters settings
Speed Control Mode		Analog Command Input	Voltage Range	0 ~ ±10 VDC
			Input Resistance	10 K ohm
			Time Constant	2.2 us
		Speed Control Range		1 : 5000
		Command Source		External analog command / Register
		Smoothing Strategy		Low-pass and S-curve filter
		Torque Limit		Via parameter setting or analog input
		Bandwidth		Maximum 1 kHz
		Speed Accuracy		The load fluctuation (0 ~ 100%) is 0.01%
				The power fluctuation (±10%) is 0.01%
				The ambient temperature fluctuation (0 ~ 50 degree centigrade) is 0.01%
Torque Control Mode		Analog Command Input	Voltage Range	0 ~ ±10 VDC
			Input Resistance	10 K ohm
			Time Constant	2.2 us
		Command Source		External analog command / Register
		Smoothing Strategy		Low-pass filter
		Speed Limit		Via parameter setting or analog input
Analog Monitor Output				Monitor signal can set by parameters (Output voltage range: ±8 V)
Communication Interface				RS-232 / RS-485 / USB

ASD-M-0721-M external dimension (mm)