| No comment |
Your Position: Home
> Transducer/Sensor > Photoelectric Sensors > Photoelectric Switch > PZ-G61N KEYENCE Photoelectric switch NEWCategories
PZ-G61N KEYENCE Photoelectric switch NEW
Description
PZ-G61N KEYENCE Photoelectric switch NEW
Product Description:
Built-in threaded sensor
Long-distance detection is twice that of conventional sensors
Before the light-receiving indicator to quickly align the optical axis
Do not need to screw the quick mounting bracket
Specifications:
Sensitivity adjustment | 1-turn trimmer (230°) |
Response time | 500 μs |
Operation mode | LIGHT-ON/DARK-ON (switch-selectable |
Control output | Open collector output, 30 V max., 100 mA max., Residual voltage: 1 V max. |
Protection circuit | Reversed polarity, overcurrent protection, surge absorber |
Power supply | 10 to 30 VDC including Ripple ± 10 % (P-P) |
Enclosure rating | IEC, IP67 / NEMA: 4x, 6, 12 / DIN: IP69K |
Ambient light | Incandescent lamp: 5,000 lux max., Sunlight: 20,000 lux max. |
Ambient temperature | -20 to 55 °C (-4 to 130 °F), No freezing |
Relative humidity | 35 to 85 %, No condensation |
Vibration | 10 to 55 Hz, 1.5 mm double amplitude in the X, Y, and Z directions, 2 hours respectively |
Shock | 1000 m/s2 6 times in the X, Y, and Z directions |
Housing, M18 nut(threaded models only) | Glass-fiber reinforced PBT |
Trimmer | Glass-fiber reinforced polyamide (PA) |
Case connection | Screw: Steel, zinc-nickel plated, Packing: Nitrile-butadiene rubber (NBR) |
Cable (cable models / pigtail | lyvinyl chloride (PVC) |
Connector (pigtail quick | Brass-nickel plated, Polybutyleneterephthalate (PBT), Polyvinyl chloride (PVC) |
Tightening torque | Rectangular models (Mounting hole part): 0.5 N·m max. |
Accessories*2 | Instruction manual, M18 nut x 2 pieces (nut thrubeam type), |
Weight | Rectangular cable models: Approx. 60 g (Thrubeam-models transmitter: Approx. 50 g) |
PZ-G61N KEYENCE Photoelectric switch NEWProduct Description:
Built-in threaded sensor
Long-distance detection is twice that of conventional sensors
Before the light-receiving indicator to quickly align the optical axis
Do not need to screw the quick mounting bracketSpecifications:
Sensitivity adjustment
1-turn trimmer (230°)
Response time
500 μs
Operation mode
LIGHT-ON/DARK-ON (switch-selectable
Control output
Open collector output, 30 V max., 100 mA max., Residual voltage: 1 V max.
Protection circuit
Reversed polarity, overcurrent protection, surge absorber
Power supply
10 to 30 VDC including Ripple ± 10 % (P-P)
Enclosure rating
IEC, IP67 / NEMA: 4x, 6, 12 / DIN: IP69K
Ambient light
Incandescent lamp: 5,000 lux max., Sunlight: 20,000 lux max.
Ambient temperature
-20 to 55 °C (-4 to 130 °F), No freezing
Relative humidity
35 to 85 %, No condensation
Vibration
10 to 55 Hz, 1.5 mm double amplitude in the X, Y, and Z directions, 2 hours respectively
Shock
1000 m/s2 6 times in the X, Y, and Z directions
Housing, M18 nut(threaded models only)
Glass-fiber reinforced PBT
Trimmer
Glass-fiber reinforced polyamide (PA)
Case connection
Screw: Steel, zinc-nickel plated, Packing: Nitrile-butadiene rubber (NBR)
Cable (cable models / pigtail
quick disconnect models only)lyvinyl chloride (PVC)
Connector (pigtail quick
disconnect type only)Brass-nickel plated, Polybutyleneterephthalate (PBT), Polyvinyl chloride (PVC)
Tightening torque
Rectangular models (Mounting hole part): 0.5 N·m max.
Threaded models (front M18 part): 1.0 N·m max., (side slotted hole part): 0.5 N·m max.Accessories*2
Instruction manual, M18 nut x 2 pieces (nut thrubeam type),
M18 nut x 1 piece (other threaded models)Weight
Rectangular cable models: Approx. 60 g (Thrubeam-models transmitter: Approx. 50 g)
Rectangular connector models: Approx. 10 g
Rectangular M12 pigtail quick disconnect model: Approx. 30 g
Threaded cable models: Approx. 65 g (Thrubeam-models transmitter: Approx. 55 g)
Threaded connector models: Approx. 15 g
