SHL-Q2255 Travel Switch NEW

SHL-Q2255 OMRON Travel Switch NEW

OMRON Travel Switch SHL-Q2255

Product Description:

Approved by EN, UL, CSA, and CCC (Chinese standard). (Ask your OMRON representative for information on approved

models.)

Incorporates a switch with a durable coil spring in a tough, highprecision case.

Compact and uses a single basic switch for applications where strength is required.

Models for microloads and models with operation indicators added to series.

Terminal protective cover can be switched to wire cable from either the left or right.

Sealing characteristics that meet IEC IP67 degree of protection.

Specifications:

Degree of protections		IP67 (EN60947-5-1)
Durability	Mechanical	10,000,000 operations min.
	Electrical	500,000 operations min.
Operating speed		0.1 mm/s to 0.5 m/s (hinge lever models)
Operating	Mechanical	120 operations/min
frequency	Electrical	30 operations/min
Rated frequency		50/60 Hz
Insulation resistance		100 MΩ min. (at 500 VDC)
Contact resistance		15 mΩ max. (initial value for the built-in switch when tested alone)
Dielectric	Between terminals of the same polarity	1,000 VAC, 50/60 Hz for 1 min
strength	Between each terminal and non-	2,000 VAC, 50/60 Hz for 1 min/Uimp at 2.5 kV (EN60947-5-1)
	current-carrying metal part
Rated insulation voltage (Ui)		150 V (EN60947-5-1)
Pollution degree (operating environment)		3 (EN60947-5-1)
Short-circuit protective device (SCPD)		10 A fuse type gI or gG (IEC60269)
Conditional short-circuit current		100 A (EN60947-5-1)
Conventional enclosed thermal current (Ithe)		5 A (EN60947-5-1)
Protection against electric shock		Class II (grounding not required with double insulation)
OFF reverse voltage		1,000 VAC max., 300 VDC max. (EN60947-5-1)
Vibration	Malfunction	10 to 55 Hz, 1.5-mm double amplitude
resistance
Shock	Destruction	1,000 m/s2 min.
resistance	Malfunction	300 m/s2 min.
Ambient operating temperature		-10°C to +80°C (with no icing)
Ambient operating humidity		35% to 95%RH
Weight		Approx. 62 to 72 g

Note:

1.The figures at the left are initial values.

2.The ratings at the left may vary depending on the model. Contact your OMRON representative for further details.

*1.The head section of the plunger type SHL-D(Q)[][] is excluded.

*2.Durability values are calculated at an operating temperature of +5°C to +35°C, and an operating humidity of 40% to 70%RH.

*3.The values are for the plunger-type models.