D4C-1450 Travel Switch NEW

D4C-1450 OMRON Travel Switch NEW

OMRON Travel Switch D4C-1450   

Product Description:

Approved by EN, UL, CSA, and CCC (Chinese standard). (Ask your OMRON representative for information on approved models.)

Sealing characteristics that meet IEC IP67 degree of protection.

Triple-sealed construction:

Plunger section sealed via nitrile rubber packing seal and diaphragm; switch section sealed via nitrile rubber cap; cable entrance sealed via encapsulating material.

Cable lengths of 3 and 5 m available on standard models. Models also available with UL and CSA-certified cables.

Multiple mounting possible with Switches with Plungers.

Models with red LED indicators added to series for easy confirmation of operation. (Set by default to light for non-operation.)

VCTF oil-resistant cables with CE marking. (Applicable only to standard models.) 

Specifications:

Degree of protection		IP67
Durability *1	Mechanical *3	10,000,000 operations min.
	Electrical *2	200,000 operations min. (5 A at 125 VAC, resistive load)
Operating speed		0.1 mm/s to 0.5 m/s (in case of plunger)
		1 mm/s to 1 m/s (in case of roller lever)
Operating	Mechanical	120 operations/min
frequency	Electrical	30 operations/min
Rated frequency		50/60 Hz
Insulation resistance		100 M Ω min. (at 500 VDC)
Contact resistance (initial)		250 m Ω max. (initial value with 2-m VCTF cable)
		300 m Ω max. (initial value with 3-m VCTF cable)
		400 m Ω max. (initial value with 5-m VCTF cable)
Dielectric	Between terminals of the same polarity	1,000 VAC, 50/60 Hz for 1 min
strength	Between current-carrying metal part	1,500 VAC, 50/60 Hz for 1 min
	and ground	Uimp: 2.5 kV (EN60947-5-1)
	Between each terminal and non-current-	1,500 VAC, 50/60 Hz for 1 min
	carrying metal part,	Uimp: 2.5 kV (EN60947-5-1)
Rated insulation voltage (Ui)		300 V (EN60947-5-1) *5
Pollution degree (operating environment)		3 (EN60947-5-1)
Short-circuit protective device (SCPD)		10 A fuse type gI or gG (IEC60269)
Conditional short-circuit current		100 A (EN60947-5-1)
Conventional enclosed thermal current (I the)		5 A, 4 A, 0.5 A (EN60947-5-1)
Protection against electric shock		Class I (with grounding wire) *6
Vibration	Malfunction	10 to 55 Hz, 1.5-mm double amplitude *4
resistance
Shock	Destruction	1,000 m/s2 min.
resistance	Malfunction	500 m/s2 min. *4
Ambient operating temperature		-10 ° C to +70 ° C (with no icing)
Ambient operating humidity		35% to 95%RH
Weight (D4C-1202)		With 3-m VCTF cable: 360 g
		With 5-m VCTF cable: 540 g

 

Note:The above figures are initial values.

*1.The values are calculated at an operating temperature of +5°C to +35°C, and an operating humidity of 40% to 70%RH. Contact your OMRON sales representative for more detailed information on other operating environments.

*2.Pre-wired Models: 1,000,000 operations min. (DC specifications, switching current: 0.1 A)

*3.Outdoor specifications: 500,000 operations min.

*4.Excluding Plastic Rods.

*5.Pre-wired models: 250 V

*6.Pre-wired models: class III