E2EY-X8C1 Proximity Switch NEW

E2EY-X8C1 OMRON Proximity Switch NEW

Product Description:

Non-ferrous metals, such as aluminum and brass, are detected.

Ferrous metals, such as iron and nickel, are not detected.

Aluminum foil, however, cannot be detected.

Specifications:

Model		E2EY-X4C1	E2EY-X8C1
Sensing distance		4 mm ±10%	8 mm ±10%
Set distance		0 to 2.8 mm	0 to 5.6 mm
Differential travel		20% max. of sensing distance
Detectable object		Non-ferrous metal (Does not detect ferrous metal.)
Standard sensing object		Aluminum: 18 × 18 × 1 mm	Aluminum: 30 × 30 × 1 mm
Response frequency *		70 Hz
Power supply voltage		12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
(operating voltage range)
Current consumption		20 mA max.
Control	Load	NPN open-collector output, 100 mA max. (at 30 VDC)
output	current
	Residual	2 V max. (Load current: 100 mA, Cable length: 2 m)
	voltage
Indicators		Detection indicator (red)
Operation mode		Load ON: NO (Refer to Datasheet.)
(with sensing object approaching)
Protection circuits		Reverse polarity protection, Load short-circuit protection, Surge suppressor
Ambient temperature range		Operating/Storage: -10 to 55°C (with no icing or condensation)
Ambient humidity range		Operating/Storage: 35% to 95% (with no condensation)
Temperature influence		±20% max. of sensing distance at 23°C in the temperature range of -10 to 55°C
Voltage influence		±2.5% max. of sensing distance at rated voltage in rated voltage ±15% range
Insulation resistance		50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance		Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection		IEC 60529 IP67, in-house standards: oil-resistant
Connection method		Pre-wired Models (Standard cable length: 2 m)
Weight (packed state)		Approx. 140 g	Approx. 190 g
Materials	Case	Nickel-plated brass
	Sensing	Heat-resistant ABS
	surface
	Clamping	Nickel-plated brass
	nuts
	Toothed	Zinc-plated iron
	washer

The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance