| No comment |
Your Position: Home
> Transducer/Sensor > Photoelectric Sensors > Photoelectric Switch > E2EY-X8C1 Proximity Switch NEWCategories
E2EY-X8C1 Proximity Switch NEW
Description
E2EY-X8C1 OMRON Proximity Switch NEW
Product Description:
Non-ferrous metals, such as aluminum and brass, are detected.
Ferrous metals, such as iron and nickel, are not detected.
Aluminum foil, however, cannot be detected.
Specifications:
Model | E2EY-X4C1 | E2EY-X8C1 | |
Sensing distance | 4 mm ±10% | 8 mm ±10% | |
Set distance | 0 to 2.8 mm | 0 to 5.6 mm | |
Differential travel | 20% max. of sensing distance | ||
Detectable object | Non-ferrous metal (Does not detect ferrous metal.) | ||
Standard sensing object | Aluminum: 18 × 18 × 1 mm | Aluminum: 30 × 30 × 1 mm | |
Response frequency * | 70 Hz | ||
Power supply voltage | 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. | ||
(operating voltage range) | |||
Current consumption | 20 mA max. | ||
Control | Load | NPN open-collector output, 100 mA max. (at 30 VDC) | |
output | current | ||
| Residual | 2 V max. (Load current: 100 mA, Cable length: 2 m) | |
| voltage | ||
Indicators | Detection indicator (red) | ||
Operation mode | Load ON: NO (Refer to Datasheet.) | ||
(with sensing object approaching) | |||
Protection circuits | Reverse polarity protection, Load short-circuit protection, Surge suppressor | ||
Ambient temperature range | Operating/Storage: -10 to 55°C (with no icing or condensation) | ||
Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||
Temperature influence | ±20% max. of sensing distance at 23°C in the temperature range of -10 to 55°C | ||
Voltage influence | ±2.5% max. of sensing distance at rated voltage in rated voltage ±15% range | ||
Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||
Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | ||
Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||
Shock resistance | Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions | ||
Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant | ||
Connection method | Pre-wired Models (Standard cable length: 2 m) | ||
Weight (packed state) | Approx. 140 g | Approx. 190 g | |
Materials | Case | Nickel-plated brass | |
Sensing | Heat-resistant ABS | ||
surface | |||
Clamping | Nickel-plated brass | ||
nuts | |||
Toothed | Zinc-plated iron | ||
washer | |||
The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance
E2EY-X8C1 OMRON Proximity Switch NEWProduct Description:
Non-ferrous metals, such as aluminum and brass, are detected.
Ferrous metals, such as iron and nickel, are not detected.
Aluminum foil, however, cannot be detected.
Specifications:
Model
E2EY-X4C1
E2EY-X8C1
Sensing distance
4 mm ±10%
8 mm ±10%
Set distance
0 to 2.8 mm
0 to 5.6 mm
Differential travel
20% max. of sensing distance
Detectable object
Non-ferrous metal (Does not detect ferrous metal.)
Standard sensing object
Aluminum: 18 × 18 × 1 mm
Aluminum: 30 × 30 × 1 mm
Response frequency *
70 Hz
Power supply voltage
12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
(operating voltage range)
Current consumption
20 mA max.
Control
Load
NPN open-collector output, 100 mA max. (at 30 VDC)
output
current
Residual
2 V max. (Load current: 100 mA, Cable length: 2 m)
voltage
Indicators
Detection indicator (red)
Operation mode
Load ON: NO (Refer to Datasheet.)
(with sensing object approaching)
Protection circuits
Reverse polarity protection, Load short-circuit protection, Surge suppressor
Ambient temperature range
Operating/Storage: -10 to 55°C (with no icing or condensation)
Ambient humidity range
Operating/Storage: 35% to 95% (with no condensation)
Temperature influence
±20% max. of sensing distance at 23°C in the temperature range of -10 to 55°C
Voltage influence
±2.5% max. of sensing distance at rated voltage in rated voltage ±15% range
Insulation resistance
50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength
1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistance
Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection
IEC 60529 IP67, in-house standards: oil-resistant
Connection method
Pre-wired Models (Standard cable length: 2 m)
Weight (packed state)
Approx. 140 g
Approx. 190 g
Materials
Case
Nickel-plated brass
Sensing
Heat-resistant ABS
surface
Clamping
Nickel-plated brass
nuts
Toothed
Zinc-plated iron
washer
The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance
