No comment |
>
Transducer/Sensor >
Photoelectric Sensors >
Photoelectric Switch >
E2E-X8MD1-M1G-Z Proximity Switch NEWE2E-X8MD1-M1G-Z OMRON Proximity Switch NEWProduct Description:
Standard Sensors for detecting ferrous metals.
Wide array of variations. Ideal for a variety of applications.
Models with different frequencies are also available to prevent mutual interference.
Superior environment resistance with standard cable made of oilresistant PVC and sensing surface made of material that resists cutting oil.
Specifications:
Size
M8
M12
M18
M30
Shielded
Shielded
Unshielded
Shielded
Unshielded
Shielded
Unshielded
Shielded
Unshielded
Model
E2E-
E2E-
E2E-
E2E-
E2E-
E2E-
E2E-
E2E-
X2D[]
X4MD[]
X3D[]
X8MD[]
X7D[]
X14MD[]
X10D[]
X20MD[]
Sensing distance
2 mm ±10%
4 mm ±10%
3 mm ±10%
8 mm ±10%
7 mm ±10%
14 mm ±10%
10 mm ±10%
20 mm ±10%
Set distance *1
0 to 1.6 mm
0 to 3.2 mm
0 to 2.4 mm
0 to 6.4 mm
0 to 5.6 mm
0 to 11.2 mm
0 to 8 mm
0 to 16 mm
Differential travel
15% max. of sensing distance
10% max. of sensing distance
Detectable object
Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Data Sheet.)
Standard sensing
Iron, 8 ×
Iron, 20 ×
Iron, 12 ×
Iron, 30 ×
Iron, 18 ×
Iron, 30 × 30 × 1 mm
Iron, 54 ×
object
8 × 1 mm
20 × 1 mm
12 × 1 mm
30 × 1 mm
18 × 1 mm
54 × 1 mm
Response frequency
1.5 kHz
1 kHz
0.8 kHz
0.5 kHz
0.4 kHz
0.1 kHz
*2
Power supply voltage
12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
(operating voltage
range)
Leakage current
0.8 mA max.
Control
Load
3 to 100 mA, Diagnostic output: 50 mA for -D1(5)S Models
output
current
Residual
3 V max. (Load current: 100 mA, Cable length: 2 m, M1J-T Models only: 5 V max.)
voltage
*3
Indicators
D1 Models: Operation indicator (red) and setting indicator (green)
D2 Models: Operation indicator (red)
Operation mode
D1 Models: NO
(with sensing object
D2 Models: NC
approaching)
Refer to Data Sheet.
Diagnostic output
0.3 to 1 s
delay
Protection circuits
Surge suppressor, Load short-circuit protection (for control and diagnostic output)
Ambient
Operating: -25 to 70°C, Storage: -40 to 85°C (with no icing or condensation)
temperature range
Ambient
Operating/storage: 35% to 95% (with no condensation)
humidity range
Temperature
±15% max. of sensing
±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
influence
distance at 23°C in the
temperature range of -25
to 70°C
Voltage influence
±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance
50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength
1000 VAC, 50/60 Hz for 1 minute between current carry parts and case
Vibration resistance
Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
Destruction: 500 m/s2
Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
10 times each in X, Y, and
Z directions
Degree of protection
Pre-wired Models: IEC 60529 IP67, in-house standards: oil-resistant
Connector Models: IEC 60529 IP67
Connection method
Pre-wired Models (Standard cable length: 2 m), Connector Models, or Pre-wired Connector Models (Standard cable length: 0.3 m)
Weight
Pre-wired
Approx. 60 g
Approx. 70 g
Approx. 130 g
Approx. 175 g
(packed
Models
state)
Pre-wired
---
Approx. 40 g
Approx. 70 g
Approx. 110 g
Connector
Models
Connector
Approx. 15 g
Approx. 25 g
Approx. 40 g
Approx. 90 g
Models
Materi-
Case
Stainless steel (SUS303)
Nickel-plated brass
als
Sensing
PBT
surface
Clamping
Nickel-plated brass
nuts
Toothed
Zinc-plated iron
washer
Accessories
Instruction manual
*1.Use the E2E within the range in which the setting indicator (green LED) is ON (except D2 Models).
*2.The response frequency is an average value.
Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.
*3.The residual voltage of each M1J-T Model is 5 V. When connecting to a device, make sure that the device can withstand the residual voltage. (Refer to Data Sheet for details.)
No comment |