E2EM-X4C1 Proximity Switch NEW

E2EM-X4C1 OMRON Proximity Switch NEW

Product Description:

Long-distance detection at up to 30 mm enables secure mounting with reduced problems due to workpiece collisions.

No polarity for easy wiring with DC 2-wire models.

Cable protector provided as a standard feature.

Specifications:

Size		M8	M12	M18	M30
Shielded		Shielded	Shielded	Shielded	Shielded
Model		E2EM-X2C[](-M1)	E2EM-X4C[](-M1)	E2EM-X8C[](-M1)	E2EM-X15C[](-M1)
Sensing distance		2 mm ±10%	4 mm ±10%	8 mm ±10%	15 mm ±10%
Set distance		0 to 1.6 mm	0 to 3.2 mm	0 to 6.4 mm	0 to 12 mm
Differential travel		10% max. of sensing distance
Detectable object		Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Datasheet.)
Standard sensing object		Iron, 8 × 8 × 1 mm	Iron, 12 × 12 × 1 mm	Iron, 18 × 18 × 1 mm	Iron, 30 × 30 × 1 mm
Response frequency *1		1.5 kHz	0.5 kHz	0.3 kHz	0.1 kHz
Power supply voltage		12 to 24 VDC (10 to 40 VDC), ripple (p-p): 10% max.
(operating voltage range) *2
Current consumption		13 mA max.
Control	Load	200 mA max.
output	current *2
	Residual	2 V max. (Load current: 200 mA, Cable length: 2 m)
	voltage
Indicators		Operation indicator (yellow)
Operation mode		C1 Models: NO
(with sensing object		C2 Models: NC
approaching)		Refer to Datasheet.
Protection circuits		Reverse polarity protection, Load short-circuit protection, Surge suppressor
Ambient temperature range *1		Operating/Storage: -40 to 85°C (with no icing or condensation)			Operating: -25 to 70°C
					Storage: -40 to 85°C
					(with no icing or condensation)
Ambient humidity range		Operating/Storage: 35% to 95% (with no condensation)
Temperature influence		±15% max. of sensing distance at 23°C in the temperature range of -40 to 85°C			±15% max. of sensing
		±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C			distance at 23°C in the
					temperature range of
					-25 to 70°C
Voltage influence		±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance		50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance		Destruction: 500 m/s2	Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
		10 times each in X, Y,
		and Z directions
Degree of protection		Pre-wired Models: IEC 60529 IP67, in-house standards: oil-resistant
		Connector Models: IEC 60529 IP67
Connection method		Pre-wired Models (Standard cable length: 2 m)
		Connector Models
Weight	Pre-wired	Approx. 65 g	Approx. 75 g	Approx. 150 g	Approx. 195 g
(packed	Models
state)	Connector	Approx. 15 g	Approx. 25 g	Approx. 40 g	Approx. 90 g
	Models
Materials	Case	Stainless steel (SUS303)	Nickel-plated brass
	Sensing	PBT
	surface
	Clamping	Nickel-plated brass
	nuts
	Toothed	Zinc-plated iron
	washer
Accessories		Instruction manual

*1.The response frequency is an average value.

Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.

*2.When using an M8 Model at an ambient temperature between 70 and 85?, supply 10 to 30 VDC to the Sensor and make sure that the Sensor has a control output of 100 mA maximum.