E3Z-D87 Photoelectric Switch NEW

E3Z-D87 Omron Photoelectric Sensors NEW

Product Description:

The New Standard for Compact, Long range Photoelectric Sensors Conserves

Energy and Natural Resources, One Million Sold Yearly

• Long sensing distance of 15 m for Through-beam Models, 4 m for Retro-reflective Models, and 1 m for Diffuse-reflective Models.

• Unique algorithm minimizes external interference from inverter fluorescent lighting.

• Conserves energy and represents ongoing efforts aimed at eliminating materials containing lead.

• Provides a high degree of protection (IP67), mutual interference prevention, and EN standard compliance.

• Mechanical axis and optical axis offset always less than ±2.5° greatly simplifies optical axis alignment.

Specifications:

Sensing method			Through-beam			Retro-reflective with MSR function	Diffuse-reflective		(Narrow­beam Models)
Item	NPN out­put	Pre-wired	E3Z-T61	E3Z-T62	E3Z-T61A	E3Z-R61	E3Z-D61	E3Z-D62	E3Z-L61
Model		Connector (M8)	E3Z-T66	E3Z-T67	E3Z-T66A	E3Z-R66	E3Z-D66	E3Z-D67	E3Z-L66
	PNP out­put	Pre-wired	E3Z-T81	E3Z-T82	E3Z-T81A	E3Z-R81	E3Z-D81	E3Z-D82	E3Z-L81
		Connector (M8)	E3Z-T86	E3Z-T87	E3Z-T86A	E3Z-R86	E3Z-D86	E3Z-D87	E3Z-L86
Sensing distance			15 m	30 m	10 m	4 m (100 mm) *1 (when using E39-R1S) 3 m (100 mm) *1 (when using E39-R1)	White paper (100 × 100 mm): 100 mm	White paper (300 × 300 mm): 1m	90 + 30 mm (white paper, 100 x 100 mm)
Spot diameter (typical)			--­						(2.5 dia. and sensing dis­tance of 90 mm)
Standard sensing object			Opaque: 12-mm dia. min.			Opaque: 75-mm dia. min.	--­
Minimum detectable object (typical)			--­						0.1 mm (cop­per wire)
Differential travel			--­				20% max. of setting distance		Refer to Engi­neering data on page 9.
Directional angle			Both emitter and receiver: 3 to 15°			2 to 10°	--­
Light source (wavelength)			Infrared LED (870 nm)		Red LED (660 nm)	Red LED (660 nm)	Infrared LED (860 nm)		Infrared LED (650 nm)
Power supply voltage			12 to 24 VDC±10%, ripple (p-p): 10% max.
Current consumption			35 mA max. (Emitter: 15 mA max., Receiv­er: 20 mA max.)			30 mA max.
Control output			Load power supply voltage: 26.4 VDC max., Load current: 100 mA max. Residual voltage: Load current of less than 10 mA: 1 V max. Load current of 10 to 100 mA: 2 V max. Open collector output (NPN/PNP depending on model) Light-ON/Dark-ON selectable
Protection circuits			Reversed power supply polarity protection, Output short-circuit protection, and Re­versed output polarity protection			Reversed power supply polarity protection, Output short-circuit protection, Mutual interference prevention, and Reversed output polarity protection
Response time			Operate or reset: 1 ms max.	Operate or reset: 2 ms max.	Operate or reset: 1 ms max.
Sensitivity adjustment			One-turn adjuster
Ambient illumination (Receiver side)			Incandescent lamp: 3,000 lx max. Sunlight: 10,000 lx max.
Ambient temperature range			Operating: −25 to 55°C, Some connector models: −40°C to 55°C *2 (with no icing or condensation)
Ambient humidity range			Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance			20 MΩ min. at 500 VDC
Dielectric strength			1,000 VAC, 50/60 Hz for 1 min
Vibration resistance			Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance			Destruction: 500 m/s2 3 times each in X, Y, and Z directions
Degree of protection			IEC, IP67
Connection method			Pre-wired cable (standard length: 2 m and 0.5 m), Connector (M8)
Indicator			Operation indicator (orange) Stability indicator (green) Emitter has power indicator (orange) only.
Weight (packed state)	Pre-wired cable (2 m)		Approx. 120 g			Approx. 65 g
	Connector		Approx. 30 g			Approx. 20 g
Material	Case		PBT (polybutylene terephthalate)
	Lens		Modified polyarylate			Methacrylic resin	Modified polyarylate
Accessories			Instruction manual (Neither Reflectors nor Mounting Brackets are provided with any of the above models.)