E3X-SD11 Simple Fiber Amplifier NEW

E3X-SD11 Omron Simple Fiber Amplifier NEW

Product Description:

The Standard for Fiber Amplifiers with Simple Operation and High Performance

? Operation so simple that essentially anyone can use the amplifier right way.

? Immediately determine operation and amount of light with a simple, bright display.

? General-purpose capabilities to simply handle a broad range of applications..

Specifications:

Type		Digital display and direct key setting	Bar display and adjuster setting
		Standard models	Standard models	High-speed detection models	Water-resistant models
Model		E3X-SD?	E3X-NA?	E3X-NA?F	E3X-NA?V
Light source (wavelength)		Red LED (620 nm)	Red LED (680 nm)
Power supply voltage		12 to 24 VDC ±10%, ripple (p-p): 10% max.
Current consumption		960 mW max. (Power supply: 24 V, Current consumption: 40 mA max.)	35 mA max.
Control output		Open-collector output (NPN or PNP) Load power supply: 26.4 V max., Load current: 50 mA max. (Residual voltage: 1.5 V max.) (*1) Light-ON/Dark-ON mode selector
Response time		Operate or reset: 200 µs max. (*2)		Operate: 20 µs max. Reset: 30 µs max.	Operate or reset: 200 µs max. (*2)
Sensitivity adjustment		UP/DOWN direct key setting, teaching	8-turn sensitivity adjuster (with indicator)
Protection circuits		Power supply reverse polarity protection, output short-circuit protection, output reverse polarity protection (*3)
Timer function		ON/OFF-delay timer: 10 ms (each fixed)	OFF-delay timer: 40 ms (fixed)
Mutual interference prevention		Up to 5 Amplifiers (optically synchronized)		None	Up to 5 Amplifiers (optical­ly synchronized)
Ambient illumination		Receiver side Incandescent lamp: 10,000 lux max. Sunlight: 20,000 lux max.
Ambient temperature range		Operating: Groups of 1 to 3 Amplifiers: −25°C to 55°C Groups of 4 to 11 Amplifiers: −25°C to 50°C Groups of 12 to 16 Amplifiers: −25°C to 45°C Storage: −30°C to 70°C (with no icing or condensation)
Ambient humidity range		Operating and storage: 35% to 85% (with no condensation)
Insulation resistance		20 M?. min. (at 500 VDC)
Dielectric strength		1,000 VAC at 50/60 Hz for 1 minute (*4)
Vibration resistance		Destruction: 10 to 55 Hz with a 1.5-mm double amplitude for 2 hrs each in X, Y and Z directions
Shock resistance		Destruction: 500 m/s2, for 3 times each in X, Y and Z directions
Degree of protection		IEC 60529 IP50 (with Protective Cover attached)			IEC 60529 IP66 (with Protective Cover at­tached)
Connection method		Pre-wired (standard cable length: 2 m), or connector
Weight (packed state)		Pre-wired model: Approx. 100 g, Model with connector: Approx. 55 g (*5)
Material	Case	Polybutylene terephthalate (PBT)
	Cover	Polycarbonate			Polyethersulfone (PES)
Accessories		Instruction manual